Hi everyone
Here is a problem I have been having with a video transmitting over fiber. I have
A spectra IV camera installed at the top of a building the camera is hooked up as follows
Coax, data and power feed out of the camera to a Nema box. Inside the Nema box the video is connected to a video and data over fiber module. At the head end a receiver transmits the video back to a coaxial cable. The issue I have been having is that the video has white bands horizontally over the screen. I connected my service monitor to the camera directly and have good video but at the head end I connect directly to the Fiber module and I get the white bands. The customers say that the video is completely white out in the morning but it starts coming back little by little as the day progresses .the camera and fiber module were replaced and a different fiber strand was used and the video was clear and good but a couple of days Later the white bands came back. Now there is something that have to tell you beside the Nema box is a couple of antennas and the power of the antennas is splice into the outlet that powers the camera and fiber module. I have said to the customer that I would like to relocate all the video components to a separate box with its own power but they believe that it was working before fine that it’s not the problem. Has anyone had an issue with video distortion due to antennas?
Thank you.
