ignacioxx1

I am having a problem with a linear system when someone make a call through the tele-entry system i hear the system dial, connect and when the person speaks the sounds fades out but they can still hear me. checked for ground faults but there are none. Thanks in advance.

just update to give results on this trouble for others the transcore unit was on the same power line as another unit. found out when the units where activated at same time the load on the line made voltage drop and unit did not work within the suggested power outline. and on one of the junction box; found wire that was unshielded. fixing these two problems made the differance. all works well.

thanks will give a try.

i am working on a system 7 the panels are a 6000 and a 4000 in the 4000 model hooked up to a transcore i get a different card number then in the 6000 model also i had to open in the 4000 model all bit rates till 40 bit jumping only the 2nd pin this is the only way i could get the relay to open for that reader to release. how could i get the panel to read the cards the same. is it the bit rate of the trans core and if so please a little cheat sheet to guide me thanks in advance