sandtech

So I was looking at standard coax system but reading the forum i started looking at HikVision http://www.nellyssecurity.com/complete-8-channel-hikvision-3mp-bullet-dome-ip-surveillance-system-382.html This is going in a warehouse with three registers. Never used HikVision used geovision a lot, what is the quality of hikivsion We are trying to cover the full warehouse including two cameras outside

what would you guys recommend for 16ch 1080p dvr. thank you

This card looks exactly like 120N16 divis capture dvr card. drivers works fine, but cant use there software saying serial number is in in there database. any idea of software that would work with this card it uses techwell tw2804 chipset

any recommendation to what software to use for IPAD, to watch the dvr remotely. thank you

how many days you trying to record? looking at the drive space

You need low voltage license in CT to run Cat5 cable. we are covered by law. not an issue. I didnt want to go to an engineer, but was at an engineer house, and he does pretty high end stuff. there company does almost every museum in the USA. So he's doing the system design, going with American dynamics solution. and he agreed not to use PTZ because nobody will be setting in front of a pc to watch all day. thank you for all the help.. I will keep lurking around, and show end product at the end.

I am in IT, have an electrician on staff. We do a lot of Data drops wiring, full network setup, installed few simple camera system. But trying to get into better system. I do repair on camera's system from one company that does all of burgerking, and mcdonalds in our state. Good point in regard to Ptz. I done google earth and added the cameras. So I have pretty good understanding. I don't want to ask an Engineer not at this point not for 6-10camera system. Going to do Visio drawing of the building and use Axis tool to add the cameras. I came here to learn more, i read a lot on the forum, and learning little by little.

wanted to do it with out an engineer. was going to go with 4x AXIS P1346-E and 2x AXIS 215 PTZ-E 1x POE Switch using AXIS software for the DVR, with 3 TB of HDD space but again i am researching, wonder if there are cheaper solution than the P1346 that can do the job

was approached a clients to help with camera systems. 1. Shop with 10,000 sq one room and second room with 5000sq need to cover those two rooms, was going to use PTZ camera in center to cover the whole area and then needed cameras outside, front and back are 100ft and side of building are 250ft can i use single camera on each end to cover the whole side and front of building. ? Should i go with IP camera's or traditional camera system Was looking at Axis camera system for IPs.