joseph.chen0312

Hi You could think take 3 solution whic hbased on your budget and enviroment. 1). Sporting cam whic his megapixel and all-in-one DVR deveice it means you need install all racing car. 2). Wireless Camera + RX device to DVR and hooking up a monitor to real-time view. 3). Miniature cam + portable DVR this portfolio is little bit cheaper than Megapixel sporting cam If you need solution I think there are some guys I could refer you to touch.

Hi U could try becasue if you need new 25V firmware, you could contact me.

Hi sir would you kind tell me whcih software to carry so amazing architecture becasue I have go though the OmniGrafflePro but I can figure which one is right. Thanks,

in main manue you have default the even and fill-in your account to trigger.

Yes it not means Termal camera( such as FLIR Corp), whic hfor military segment. And could I add some information for night vision, which not only in IR camera but stra light camera(W/O IR lamp utilized superior low lux lens) in this loop. As you know the IR camera is well applicable in normal space but the star light is good for extreme complex enviroment particularly in multi chaotic lighting source such as pub, bar, night club...

Hi please make more sense it is commonly for equip in appartment to view the status via your TV. A lot of rich and verteran is proficient this products.

Hi, From your abstract describtion, I guess it must the IR light reflect to the lens and /or CCD sensor, could I know which type you own e.g. body, bullet(w/IR or not), Dome(W/IR or not).. Better way you could crop the picture via DVR it would be better to dissect the probably reason to cause this phenomenon.

hi All, As you know all basis is in Asia, ther all cosign oem/odm project.

I agreewith rory dahua is big boy ithis field but 32Ch is weekness for allocation the video source to 4Ch in D1 the rest of is in CIF. I am sure all of you acknowledge it does weird. Buy the way another solution is you could consider takes Matrix Box to out put all video to onw monito even TV wall.

you could check the main menu and you could find the back up and then set up even some items allow you remote back up via lan/wan

If you need we could help you there.

Hi I think you could googling for golden key for that because all initial design must be featued. for loosing the key. After check I think this type should be Dahua produced.

I agree with Bpzle all the OS is natively design for the utility, it is hard to change unless it takes the same solutions, but even this all features and functions is not equivalent.

Hi http://www.weihai.com.tw/product_detail.php?pid=8

Hi it loks great in fundational spec, as you concern, does it affordable LPR, I am courious does it featued OSD board or toggle button cable? If it has, you should try try parameter in slow shutter and some elase function e.g. HSBLC on for prevent explosue from headlighting. If you really need LPR camera I think we could offer you esome good stuff.

HI i think I could figure out a solution for you which is not need activex installation and full D1 in 8/9 channel.

Hello all, You could try this new one. http://totalcontrolapp.com/index.php?option=com_content&task=view&id=15&Itemid=29

Hi it is normaly design two output for one is main to remote and control and spot is only to monitoring watch.

Hi John, As you questioned, the key point is how the supplier to design the logic computing and where how many DSP/SOC they utlize. I agree guy's feedback, 9if your project is not strick and tight, it would be enough for capture status change in hot spot to set up motion detect. By thee way, if you need D1 in recording, live view and play back, pls cpontact me, I think our stuf would be reach the bar. Joseph Chen

Dear All, I think there are two possible reason caused that, first I agree with yoru point is qulaity for Balun and cable because not all items couls sustain delivery steady signal to 150m, if you take cheap one you will fail for signal attenuation highly. Another you may be could check what is the system in DVR PAL or NTSC, you knwo it total different frequency.

Hi I thinok it need to be so high technique in the project. Just carry one camera which equipped PIR and flooding ligh. When any object is appear infront of gate the PIR will toggling the floodinglight and camera to capture the image. of course, if you have enough budget you could hook-up to 4Ch DVR to remote and monitoring.

Hi, I think you shpould take someone of watersist and anti-explosive type PTZ but I am not sure does it integrated with IP function or not, if it no you could consider hook up video encorder or DVR to link the LAN/WAN to remote and monitoring. There are some well name company in the field.

Hi all, If you are not sure does it authentoticity of part, you could check toggle button to operate the function but sometimes not all parameter is design in for limited space on board. if you need I could send you effio-e spec for your reference.

Hi, Yes I belieb you are confused at spec as they stated. I think I could offer you datasheet of effio-e box camera. You could compare how is it.

Better way , do not take IR camera or you will facing nightmare, you should consider teh starlight type and 420tVl resolution for reduce complex lighting, especially Neon, spot.. all mix up. Becasue my friend have terrible experience and we have tried long time to shoot this trouble.