eos

I too never got EZVIZ to work as advertised. If it did work would it make a P2P connection without port forwarding? I have a job with internet but no access to router management. I would love to get my NVR from Hik to go through the firewall. Just wondering.

My recollection is under "Camera" then "Schedule" then under "Advanced" tab. At one point I had the same problem--Dahua's seems to be in a more logical location. FWIW:I do like the motion detect algorithms from Hik far better than Dahua.

I have noticed some issues also. But it maybe the horrible DSL circuit at one of my customers businesses. The other issue with Hik has been with the Turbo DVR TVI units ( the only style of Hik I have used) DDNS. It will not let you use the browser method to set it--after putting in the domain name it brings back a "not valid" response. I finally had to use a directly connected HDMI monitor to set it. The hik-online.com site shows this unit off and on-line frequently. OT--It would be nice to have these Hik DVR's have some sort of scheduled reboot like the Dahua units have--seems to solve connectivity issues. OT--The Hik HDTVI DVR motion detection is far superior to the sh*&ty Dahua as I have discovered with the 4 units I have installed (1000% better motion detection)

Curious how to get both continuous and motion recording working on this unit. Picked one up at my supplier and they indicate it will only do continuous or motion but not both. My recording time bar is yellow (manual) but my cameras are all set to motion only. Seems puzzling, the Dahua product has no problem doing this across all their platforms. Any ideas?

Would be good to know, I also purchase through that supplier but have yet to pull the trigger on that technology. What I have seen from using the IP 720 eyeball cameras is far superior to analog. The CVI cameras look identical. The issue which I would like to know is can you set all the WDR and BLC and day/night schedules on this CVI camera directly through the DVR? The individual set-up of each IP camera directly through the network lets you optimize each location. The settings in the NVR are pretty basic and don't let you do individual BLC patterns or schedules. The other issue is a lot of my jobs have a mixture of cat-5 baluns and rg-59 which makes it difficult to transition.

I have several jobs with the same issue of day/night switching, so I put each Dahua camera on it's own schedule to switch manually between day and night. However for no rhyme or reason, some cameras just go back to full time "day". Does the Dahua NVR cause this or is there some sort of software glitch? My authorized rebranded U.S. supplier has been of no help in this. Also no one there seems to know anything about why the motion pattern in each Dahua IP camera is nice and flexible with threshold and sensitivity, the Dahua NVR still has the detect squares and sensitivity from 1-5. Which means changing the detect pattern in the NVR erases the pattern set in the camera and overwrites it with a poor substitute. Do you think the NVR firmware will mesh with the IP camera detect settings at some point? I figure I will never know Any help would be appreciated.

I was wondering does the Dahua or other brand HD-SDI DVR's let you do full configuration of each camera without going to each camera and using an analog monitor? With IP cams you can get into the web interface of each for full configuration.

Just connect mouse to NVR with a monitor connected, go into "menu" under "display" you should see "tour", check the box then uncheck all of the boxes except the (tour) that you desire. Any pattern you choose will stay upon a reboot. The issue with the cameras in wrong order would be solved by deleting all cameras under remote device and re-enroll them in the order you prefer.

Regarding the new firmware, we have the Dahua 1.3 megapixel eyeball cams and bullets going to the 32 channel non-poe NVR with latest firmware in all items from Gen4. The puzzling issue is that motion detection in camera has the new threshold and sensitivity features, and the NVR does not. Therefore if you set it in the camera and then apply any setting under "detect" in NVR you will have changed everything in the camera. Basically getting a continuous motion recording situation and ruining whatever patterns you have set up. The new firmware in camera only gives 4 adjustable squares for motion detection areas, the NVR has anything you want with only a global 1 to 5 sensitivity level. Therefore no meshing between camera and NVR. Has anyone overcome this or is there new firmware for the NVR that has the new motion settings? Also what would cause the cameras to change their profile schedule day/night back to full? Kinda a pisser to find all your cameras on this job going back to color when you have set them to go black/white at night a week later randomly. Clock is set in each camera properly with the correct time in each one. Seems like a bug to me, the mfg. has not helped in any of the above issues. Thoughts?

We are an alarm company that uses G4 and with the latest firmware and optimizer firmware installed in a 32 channel NVR with cameras with latest firmware, I noticed the threshold bar using Web Service in IE. I clicked on detect and it shows up for a split second then the old style screen comes back similar to what the poster said above. What is up with this? Is the new style of "detect" far superior to the old way. I do not like the current way, it has not been too effective for our company. Maybe someone could find out. Thanks

So you are referring to getting into those cameras (built-in web server) directly that are plugged into the 4 POE ports via WAN or LAN or you cannot view anything over WAN due to not being able to port forward the NVR? Seems that I would want to view my NVR via WAN. So restated, I can still set up cameras via the NVR but the NVR would prevent me from getting into each camera directly after plugging them into the built-in POE switch? So the only work-around would be to not purchase this 4 port POE unit and get the regular NVR and just use an external POE switch with the NVR plugged into the same common network switch as the POE switch? Looks like G4 has listed the new vertical desktop version NVR on their website.

Bump Still wondering if a 4 x 4 quad view could be done with the Fast viewer or maybe if you could pull the corner to make it bigger like the single view remote viewer? Thanks

Rory, Is there a way to have simple view as a 4 x 4 window for 16 cameras? I've got one customer with 3 locations : Main office using a 32 chan ICrealtime (25 channels) using PSS, remote office using 16 chan ICR using web browsing IE to display these and another office having a 16 channel GenIV. It is a PIA to get the girls in this office to get all the cameras up. It would be way easier to just have one computer having 4 x 4 simple view on desktop then extended desktop monitor having a 4 x 4 simple view and possibly putting in another video card into this desktop computer to have another monitor with another 4 x 4 simple view. The reason is that if you put up all 64 cameras they are too small to look at. I guess if the 3 x 3 quad is the biggest then they could pick the 9 important cameras for viewing from each site. Thanks for your work.

My brother and I just flew back into So. Cal yesterday from the show. The free food and open bars this year were all over the place. Was a good show, found some new lines and products to fill some niches in our arsenal. Saw that razberi product at a booth with many other products. Seems like a nice product for small IP jobs, which I am starting to get into. http://www.razberi.net/products/recorders/raz-m4/ Razberi has basic free software that will run on the NVR. However it seems that onssi wants me to use their software ocularis http://www.onssi.com/products/ocularis-overview and then so does exaqt https://www.exacq.com/products/EL_series_IP_servers.htmlwhich wants me to buy their hardware and software too. The software between the bunch seems to do stuff only seen in the movies. I wonder what the most cost effective software is for small 4 - 16 camera jobs would be? Customers want Ipad/phone/ android playback and stream to all browsers. What's up with the "Dahua" style DVR's, I saw units from other companies in the main area and the China/Korea town area that has the exact same "PSS" software and functionality. Are these companies copying the stuff legally? Seems odd when I asked questions and they gave me a blank look. One guy said his would run on all browsers, and showed me the setting for RSTP port or something to that effect. Would this work for Dahua? using safari, chrome, firefox, ie etc. Saw these enclosures from Moog/Videolarm http://www.videolarm.com/product/camera-enclosures-ptz-fixed/fusion-camera-housing/ awesome cooling and enclosures for any camera that will withstand the elements. Still looking for an "eyeball" style camera which has a video test port and OSD without taking the camera down. I guess this could do the trick from ATV http://www.atvideo.com/products/tc2812w-tc0650w but still would like to have a little room behind for connections if mounting it to a concrete wall with no "wall bracket" which looks ugly. Too bad it's over, I'm like a kid in a candy store....that's why my wife will not go. I could talk shop for hours and hours, usually I'm just out in the field supervising guys and installing/programming and don't talk to anyone. It's good to be able to talk to people about your passion and they actually know what your talking about.

Rock solid, been using them since they came on the market. Wireless transmitters of all shapes and sizes. Google these part numbers to your hearts content: http://utcfssecurityproducts.com/ProductsAndServices/Pages/60-660-01-95R.aspx http://utcfssecurityproducts.com/ProductsAndServices/Pages/60-760-95R.aspx http://utcfssecurityproducts.com/ProductsAndServices/Pages/60-760-95R.aspx

Since someone bumped this, what about the Vitek http://www.vitekcctv.com/ProductDetails.asp?ProductID=681 VT-LTR13V laser transmitter, saw it at the ISC show in Vegas last year. Have not put one in, but they had one on display and showed how as the elevator gets farther away from the receiver the beam gets bigger and therefore more robust.

Just put in 12 of the indoor version of this "CD-HD21N-L" and 12 of the outdoor bullet "CB-HD39-L". The indoor version probably will be my go-to IR indoor dome. The menu and picture quality was top notch for the indoor version, the installation ease and the way the camera pan/tilts in the initial setup makes it easy. I wish the price points on these Nuvico units were a little less though and they had the lens set for 2.8mm, the batch that I got had some set to 6mm and some at 2.8mm. If the CV-HD21N-L is the same, then I would go for it. My issue was with the older Nuvico Domes, they had IR reflection issues and would not tilt fully if mounted on a wall looking straight down.

I chuckle, you have now jumped from a bad power supply to the entire company is terrible. Just get another power supply, stagger the splices, put some heat shrink around each of them plus the overall cord and move on. Parts fail. If I only had a dollar for each of the parts that have failed in the 25 years of business......

Since I do a lot of High-end residential systems and some commercial systems, running new wire is not always an option when sending the output of the DVR to a unused input on a TV. With Ded Micros, Nuvico, Speco or Digital Watchdog I have never had an issue sending the composite Main ouptut to TV's around the house on an unused pair of Cat 5. Yes the quality is not as good as VGA or HDMI but the picture is decent. Last year we started using ICrealtime DVR's and right away the quality was noticeable. I ripped out a 16 chan everfocus machine and put in the 32 channel ICR unit with a exisiting video feed thru RG-6 to a remote TV. The customer instantly complained, I was dumbfounded, also I could not use my ViteK 3.5" monitor to do basic setup on the DVR, too blurry. Workaround was putting in a dedicated PC running PSS to send to the TV. Fast forward to yesterday, I decide to try a GEN IV DCX unit to replace a Ded Micros Ecosense DVR on an existing installation. Picture is horrible. The streaming and PSS work great. I call tech support and they seem to know about this issue but doesn't seem to faze them. Has anyone here seen this issue or is it a non-issue? I'm trying to get some love from the Dahua brand of DVR's but may have to stick with Dig Watchdog. Also it seems I get ground loops with the Dahua brand more, I took out the Ded Micros and instantly the ground loop issue cropped up. Their 4 pin power supply must have some effect or some internal filtering to prevent this. Once again, I cannot get VGA or HDMI to TV's on an existing installation, using VGA or HDMI baluns would work but the wiring usually is not there or cost prohibitive. It seems the video output board is low quality in the Dahua DVR or they just don't care.

Basically that is what I've noticed. I usually just use a balun off of the Main Output for a couple of TV's and the multi-view is not great. I may try a vga to composite converter and just build it in to the bids if necessary. It just seems that the video output processor for composite is poor when it comes to multi-view on "Dahua". Patriot: Some people like drinking the ICrealtime koolaid, I did my research so I won't have to buy their product anymore. I appreciate the tip on the app, GenIV does give a single view free app, which most customers find satisfactory, it does view ICrealtime units too. Now Dahua has to add playback to the app so I can quit selling Digital Watchdog

I'm always trying out new cameras. In this case I am using a GenIV DCX (1u) DVR that I recently installed to remove a Ded Micros Ecosense, one of the IR domes went bad so I put in a CNB LDM-24 VF to replace it. (have never used their product before) The other GE eyeball cameras and a PTZ on the job do not have this pixelation or grainy-ness that I am seeing. I usually don't touch factory settings on a camera. In this case the only thing I did was move the sharpness to 15 from 10. I did notice the DNR was set to "low". Maybe the answer is to move DNR to "med" or "high", I just can't see a manufacturer having a camera with these initial results out of the box. Has anyone used this camera before and had to make adjustments to eliminate the issue that I described? or maybe that is way it is.

It definitely is going to B/W, I just now am used to the "Dahua" smooth image that usually results from most cameras. I did see your demo of the CNB camera on your you-tube link. The one I put in is slightly pixelated. The next step would be to move the DNR to medium.

Zohan, I have been studying this product for a while since my supplier http://www.microcom.us/avn80x.html mentioned to me, or click the datasheet link or go to eagleeyescctv.com. The AVtech camera has a dry contact inputs and outputs for example releasing a door strike, or you could wire the output of this http://www.utcfssecurityproducts.com/ProductsAndServices/Pages/60-760-01-95R.aspx Quik Bridge GE product to the input on the camera to "push video" to someone when they press a panic button. It seems like a great product for indoors, live monitoring and 2 way audio, but pulling video for back up seems more difficult. I also wonder if the "pushed" video can be saved on an i phone etc. It has its limitations but could work in this instance, pc based software to set it up via IE. If you do go this route, post up on your results, I have some jobs these could be useful for.

The flex and max units have the gain box checked. The price points on the ICR units are way more than other Dahua models. They also are very deep in depth. Most of the time I need a shallow DVR for residential closets. The way this company has entered into the custom audio integrator community is impressive. Just recently a local supplier of audio and video gear has picked up the line. They make it sound like their product is leaps and bounds better than anyone else. I wonder how the chipset or hardware could be that much different than a Qvis, GenIV or other Dahua units?

Update, noticed problem on the 4 Nuvico bullets got way worse while coincidentally I was pre-wiring a guest house on the same property. No issues on the PTZ 12vdc units (case must be insulated from electronics) and 1 LTS dome(insulated on top of 4x4x2 plastic box). So I disconnected all 4 dual voltage Nuvico bullets and did try separate power supply--no help. I finally screwed the base to the lid of the 4x4x2 j-box (I should have done this at the beginning) and all issues disappeared Since it was a horse barn, the ugly gray j-box was no big deal, however getting some sort of good looking insulator under the camera could be difficult for those residential jobs.