Integraoligist

I was looking at this camera, it's a 2MP unit: http://heivision.com/goods.php?id=121 Is it missing anything? It uses NVS Center software... anyone have experience with that software? Quality/features? It has 6, 8, or 12mm lenses... being 2mp would the highest (12mm) lens be the correct way to go? Thanks again all!

Hey all, I've been trying to setup these cams to work on my Android for weeks now and i STILL can't figure this out. I've been trying IP Cam Viewer and gDMSS Lite but neither are working for me. I have 5 of the Dahua IPC-HDB3200C Hi Def 2 MP MegaPixel Outdoor Mini Dome IP Cameras I was told I can not use the same port for any of the cameras, so this is what I did so far: Cam IP 192.168.10.107 TCP: Original 37777 to 37802 UDP: kept the same HTTP: kept the same RTSP: kept the same Tried it in the apps, nothing, so then i tried: Cam IP 192.168.10.107 TCP: Original 37777 to 37802 UDP: kept the same HTTP: Original 80 to 8081 RTSP: kept the same Tried it in the apps, nothing, so then i tried: Cam IP 192.168.10.107 TCP: Original 37777 to 37802 UDP: kept the same HTTP: kept the same at 80 RTSP: Original 80 to 8081 I also went in the Router and opened each of these ports and still nothing. Ideas? Thanks all!

I've been running AXXON for almost a month now on my system. It overrides the settings in the camera itself so you set everything up right in AXXON. The motion detection and config of cam's work great. I've had it setup for exactly 24 days, and I have all 24 days recorded (via motion) on a 900gb drive. Not sure how much I have left or when it's going to start recording over itself though. Only have a couple issues with AXXON, it's slow and a bit laggy when looking at it live and recorded. It's irritating. Plus they do not have an app for Android.... PLUS PLUS in order to view it from another PC outside the network with the Client software you need to setup a VPN. And OMG that is extremely slow, i'm talking, start AXXON, come back in 10 minutes and hope you have a visual at least 1 cam. Not even moving, just at least a screen shot.

Hi all, I have a set of 5 IP cameras running on a server at my shop, I am using the AXXON software to run it. When I install the Axxon Client software on my laptop on connect wirelessly while in the shop, it automatically sees the server and connects. However, when I bring my laptop home it does not connect (obviously). Instead of the servers name (which is what it looks at while on the network) I can input an IP address instead. So I input the IP of the WAN the server is on (found via IPChicken.com) and try to connect... it does not. The router the server is connected to is a Trendnet TEW-652BRP if that makes a difference. Any help is much appreciated! Thanks!

As I am new to IP cameras, I know everything should be running better if I knew all about the correct settings for them... I've been working with the Axxon VMS.... but it just dosent seem to be what I'm looking for. I built a new system for the IP camera system so it can handle anything... I also have 950gb hdd to fill up. I have the Axxon setup to just record on motion so I have a good amount of record time. However I need a system that I can tap into via Android phone and my home PC. Axxon does not have an Android app to to use with it... which is fine, I can use a regular IP Camera viewer app but they all need to know the IP of the network (which has to stay Dynamic not static). So that is a huge pain. Ideas on what I can do? Thanks all for the help!

I've got 5 of the Dahua IPC-HDB3200C

Yes I just built this system and can handle it with no problem. Trying to figure out how to setup the recording archive is aggravating though.

Hey all, Setup my 5 new cameras . And am currently trying to configure AXXON Smart Start as the software. My questions are, how do I view the Axxon software remotely over the internet? (Their Client software looks like it needs to be installed on other PC's that are already on the same network as the server and not through the internet) And how do I view the Axxon via Android device? I tested out Milestone but it only records 5 days and when trying to configure it, all the video feeds would always drop and be super choppy... Axxon is nice and smooth feed but trying to figure out how to configure all of it is a PITA. Thanks all for the help!

Hey all, Below is a pic of our new sandwich shop... the 4 red items are the camera positions I was thinking... 1. Looking at stay under $1k for the cameras (would like wired IP cameras which I can attach to a non used PC I already have here or DVR system, whichever you suggest. I also assume Dome cameras would be best so that no one knows which way the cameras are facing?) which cameras should I go with and what size lenses? 2. How is the positioning of the cameras? Should I move any of them or add another but still stay under the $1k? The shop has 10' high drop ceiling so install will be a breeze. No need for outdoor cameras, landlord already has them installed for the parking lot. Thanks for the help all!

Nice. For cams 7,8,9 inside the building... what do you think the height of ceiling was you installed the cam's to? Looks around 15'?

I put nine of the 2MP domes in a professional building last month to replace a bunch of analog domes that were vandalized or stolen. Six in underground parking and three in the lobby area and they look GREAT. That was an "emergency" job and they had no problem shipping overnight. Also ordered four of their 3MP box cams for a public works yard, those are all working well. They've been great to deal with, and everyone else here who's bought from them will say the same... I don't think they're going anywhere any time soon. Even the spec sheet for the camera is gone from the site... just a couple of paragraphs now. I cant remember, were you able to choose what lens you wanted on these? Or no? And I thought there was mention about them adding IR to the cameras as well... have you heard anything about that? Also, what software did you use for all 9 of them? Thanks again!

Finally getting the shop completed and need to start ordering the cameras. I thought the Evesurv cameras were the best of the bunch for $200 range via everyones posts on here... so I came on here to get the link off the side of the page... and it's gone. doh! Found their site but it looks like it's been through the ringer compared to fully operational like last month. Anyone have any experience with ordering from those guys? I dont want to order up some cameras and they screwup within a year... contact the company and they be out of business.

Hey all, to continue with my other post about what cameras to get for a new well lit sandwich shop... using the Dahua 2mp cameras... all forwarding into a Gigabit switch, which type of CAT6 cabling should we go with? UTP or STP? As far as interference I have a couple of commercial refrigerators and the place is lined with drop-in florescent lighting (drop ceiling). Thoughts?

And yes they are all made of 24 AWG pure bare copper wire.

No I have not gotten any cable yet. There really is not price difference in the cables so my choices are Per 50' roll Cat5e Cat6 UTP +$1.20 Cat6A STP +$7.50 In my last shop there were always network issues... and in the 5 years could never figure it out. Changed out all the PCs, the cables, the switches... everything... and still issues. Only thing we could figure was that there must have been interference from the lighting/fridges/electrical lines running all over the place. However this shop will only have 1/4 of the fridges/lights/electrical. This shop I want perfect from the start.

My shop will have a good amount of lighting throughout so this should work pretty well then...

Soundy, how was the overall testing?

I know this is a noob question... but what is Aver?

That would be great!

Thats why I brought up the software above like the AXXON. The Evesurv tech told me to use the AXXON software because it's supported while the software that comes with the cameras does not.

It says that these 2mp cameras can go down to D1 speed for remote viewing too... My 2 options are AT&T DSL at 6mb down 756kb up for $40 a mo. (they have UVerse all over the area but for some reason NOT to my shop which makes no sence) or Com(unist)cast at $70 mo. for 12mb down and 2mb up. It's not going to be constant viewing, just here and there... but I dont want the picture to lag like 5 seconds a frame either. I'm also using the internet connection to process credit cards, which is instant and takes almost no bandwidth, and also a MagicJack voip phone, which they say needs 128kb to run smooth. But 99% of the time the phone is not in use because it's a walk-in shop. What are your thoughts?

I've been testing the 3MP box cam for a few weeks now, it holds up quite nicely beside an IQ755 (the IQ is still better in some regards, weaker in others, but runs 2.5 to 3 times the price). I just got one of the 2MP domes and haven't had a chance to put it through its paces yet, but I have high expectations based on experience with the 3MP. Have you had time to work with the new 2MP dome yet? I'd like to hear your take on it. Also, what kind of upload speed should I get as a MINIMUM for the shops internet? Obviously faster is better but i've got a somewhat limited choice and would rather not drop $300 a month on internet fees Thanks again!

Yes the AXXON looks good.... I like the videos on the site showing how easy it is to navigate and pull the old info. Only drawback I can see is that it limits to 1TB, but for me, using 5 cameras and recording only when motion is detected, that 1TB will probably be what... 6 months worth of footage? Just dont know how much system resources this pulls.

So i take that as pretty much all software, like the 2 free ones i listed, have this feature. I copied the entire chat i had with him and i'll post is up when i get home for you to take a look at.

I have need to hear this from the Dahua tech What do you mean by that?