crow

do i need to 12v power the cameras that i need to log onto? as they are all fitted and out of reach to power them for quick fix went there today and unpluged all cameras and group deleted the info in the config menu in the nvr then i pluged in 1 working camera at a time this is the first 2 cameras info only one pluged in at a time then deleted the info after i unpluged it then the 4 working cameras all in at once then this is the screen info with just 4 working cameras in ive not had much to do with poe cameras and nvr's just tvi with coax dont know whats going on is there any way i can reset the cameras without powering them and takeing them down? thanks

hi a friend has got the sannce N48PT with 8 sannce poe cameras 4 are working ok but 4 say net error or blank someone has been into the nvr menu and changed some of the cameras ip address the ones that are working have status green dot , ip/domain cameras mac address in this part port 8000, protocol type1 the 4 that dont work have 192.168.2.22 , port 80, or 8000, type onvif how do i get the cameras working again or reset them to how they were i tryed to connect my laptop to the nvr by changing the laptops ip to match lan 2 on the nvr but couldnt get any config tool to work cheers

hi thanks for the info yes all same manufacture sannce the router is about 10 foot away from the nvr i have a long ethernet cable but no adaptor to connect the camera's ethernet cable to the long ethernet cable i have i will try to get one tomorrow thanks

hi the lan 1 is 192.168.1.? and the lan 2 is 192.168.2.?

hi i have a pelco spectra 3 ptz camera when i set up a pattern it sometimes goes off the pattern i set i can set it up and then after a few hours or a couple of days it will be pointing up in the air stil doing the pattern but up into space i stripped the camera down but there is no damage to the motor plastics or the mecanism my power supply is only 2 amp is this enough? thanks

hi can anyone tell me how to get to the belt on a pelco spectra 3 camera i have taken the dome out of the camera external housing there are 4 star drive screws on the dome liner (circled in red) i took these out but it doesnt want to come apart to get to the belt thanks

hi any sugestions on how to fix cameras to corrugated sheeting where the cameras are going there is a 12mm thick steel girder my plan was to put 2 tek screws through the camera bracket into the steel girder (see picture below) only problem is the camera bracket holes are not big enough (4mm hole) i dont want to drill out the bracket for warrenty reasons the other idea was to put a block of wood inside and use wood screws through the bracket into the wood any other ideas? thanks

hi you cant just use a splitter for cctv you need an rf modulator I had to use one to get cctv into a few TV's just search rf modulator in google

i had same with a qvis one hard drive was bad

anyone used these and are they any good http://www.biz4security.com/news/detail-221-hikvision-launches-new-600tvl-dis-analog-cameras.html i usualy use qvis bullet p400 efio e cameras cheers

Hi One of my pelco spectra 3 cameras has started playing up If I move the camera with the joystick or through the network I get a full screen of numbers with degrees next to them And if I zoom in or out I get a full screen of the rectangle bars you usually get 1 when you zoom not a full screen full of them The camera still has a picture under all the numbers/rectangle bars If I go into the cameras menu and then exit the numbers are gone until I move the camera again then the screen fills up with the same crap Any ideas has it had it Cheers

just set up a new account with no-ip https://www.noip.com/sign-up you get 3 free accounts and choose the no-ip option on the dvr

hi port forward ports 80 and 34567 and 34599 only on your router to the dvr's ip adress which is 192.168.0.10 then double click where it says members.Dyndns.org on the dvr (your photo 2 in your post) and it will open up to choose the ddns settings which is where you will input you ddns account name and password this will get you going also if you try to log onto your cameras from where the dvr is (LAN) you might have to put the dvr's ip address into the ipad iphone pss on the pc software instead of the dydns name and just use the dydns when your away from the dvd (WAN)

Hi Why is it that on most of my dvr network setups using a ddns account name I can't logo to the dvr localy I have to use the DVDs IP address instead of the ddns name But I can log onto the dvr with the ddns name from the wan Thanks

great thanks for your reply thats why some work and most dont

HI my friend has one of these dd427-x and another has the dd423-x pelco ptz cameras the 27x one lights up very dark areas automaticly and the 23x one doesnt ,they are both running default factory settings has the 27x one got some kind of chip that does some kind of fancy lightening trick? cheers

Got it working now It was set to std coaxitron ,when I changed it to extended coaxitron it worked on the patterns Dip switch 2 switches were all off apart from 5 and 7 Not sure why as I put them all to off and it works ok Any one know what they should be set to Cheers

hi ive just got one of these dont know anything about matrix's all i have used before is a keyboard controller with digita display to set the board rate e.c.t connected with the rs485 twisted pair i have 2 pelco spectra 4's cameras to try out with the matrix and a keyboard joypad the matrix is a pelco cm6700 and the joypad is a kbd300a the keyboard is conected to the matrix in local keyboard socket and thats all thats connected at the moment how would i wire it up to test the 2 ptz camaras and the matrix / joypad and what would the dip switches need to be set to on the ptz's thanks for any help

got it all up and running in a fashion but cant run the pattern from the joypad any one know how to work these cant make the instructions out thanks

thanks for your replys yes must be the upscaling as its a 50 inch hd plasma with a high res a lot higher than 640x480 thanks for clearing that up

hi when i use the bnc output from the dvr to a phono adaptor to a tv's phono socket its always slightly blurry is this always the case thanks

hi my mate has on of these ptz cameras and it keeps going blurry, the automatic focus stops working and also the manual focus stops too if i do a reset to factory settings or a reeboot or cycle it will work fine for about 20 mins then go blury again any ideas whats wrong with it cheers

hi i had this exact same problem with a pelco ptz it did the same in the menu just kept rolling over and over untill i gave a flick in the opposite direction and all i did was set the dip switches all to off and just the address to 1 and this made it ok worth a try

Hi Does anyone know where to get a wall bracket from in the uk for a pelco spectra 4 27x ptz the one that attaches to the camera housing with threads in And do the smaller zoom and larger 35x ones fit the 27x thanks