GVI videoPLUS™ AR-6160 provides cost effective digital video recording of 16 cameras with real time recording at CIF resolution. AR-6160 uses H.264 compression method to reduce the storage requirements, and features audio and alarm recording with Full HD monitoring. Video management is powered by client architecture, remote web access, and compatible autoIP™ iPhone application.
Features:
30fps per channel at CIF Resolution
120fps total recording at D1 Resolution
H.264 compression
Up to 16ch Analog Video Input
Web based remote access
Remote access through CMS
Supports DDNS
Compatible with autoIP™ iPhone application
16 channel audio input
3 relay output
NO HARD DRIVE - Can hande up to 4TB storage
Full HD Video Output
Monitoring up to 1920x1080 resolution
DVD-RW
Video
Operation System
Embedded (Linux)
Input
BNC x 16, 1.0 Vp-p, 75 ohm
Output
Image Resolution Up to 1024 x 768 pixels (VGA/HDMI) NTSC: 720x480, PAL:720x576 (BNC)
Output
Call Monitor BNC x 1, 1.0 Vp-p, 75 ohm
Output
BNC Output BNC x 1 , NTSC: 720 x 480, PAL: 720 x 576
Output
HDMI 1024 x 768, 1280 x 1024, 1920 x 1080p
Output
VGA 1024 x 768, 1280 x 1024
Picture Refresh Rate
NTSC: 30 PPS/per-channel, PAL: 25 PPS/per-channel
Audio
Input
RCA x 16, Line-In
Output
Main Audio RCA x 1, Line-Out
Output
Call Audio RCA x 1, Line-Out
Compression Method
Proprietary
Data Rate
8 KB/s, per CH
Recording
Compression Method
H.264
Recording Mode
Schedule, Alarm, Motion Detection
Pre-alarm
Support
Recording Rate
NTSC 720 x 480 Max 30 fps
Recording Rate
NTSC 720 x 240 Max 60 fps
Recording Rate
NTSC 360 x 240 Max 120 fps
Recording Rate
PAL 720 x 576 Max 25 fps
Recording Rate
PAL 720 x 288 Max 50 fps
Recording Rate
PAL 360 x 288 Max 100 fps
Recording Quality
8 Levels Presets, Adjustable
Image Size
1 K to 22 KB/Picture
Storage Mode
Linear / Circular
Data Lifetime
Yes (Programmable)
Storage
Built-in Storage Interface
x 2 SATA
HDD
NONE
DVD+RW
Yes
e-SATA
none
USB
x 2 USB 2.0 Port, Supports ThumbDrive, or DVD+RW
Alarm
Alarm Input
Terminal, 4 x TTL-In
Alarm Relay Output
Terminal, 3 x N.C.-COM-N.O. , 1.0A / 30 VDC
Alarm Detection
N.C. / N.O., Programmable
Motion Detection
15 x 15 Grid Array, Sensitivity, Trigger level adjustable
Video Loss Detection
Programmable
Communication
Network Connectivity
RJ45, 10/100/1000 Mbps Ethernet, Supports PPPoE/ DDNS/ DHCP
Remote Control Software
CMS, Remote (Browser based)
Remote Operation
Monitoring, Playback, Recording, System setup, Dome camera control, Archiving
RS-485
Terminal
IR Remote
Yes
Dome Camera Control Protocol
Samsung E, videoPlus, Pelco P, Pelco D, AD422, Fastrax 2, Panasonic, JVC
General
Unit Dimension (W x H x D)
15.25 x 17.5 x 2 in. (387 x 445 x 51 mm)
Unit Weight
3.4 lbs (1.5kg)
Package Dimension (W x H x D)
20.5 x 18 x 6 in. (523 x 463 x 158 mm)
Package Weight
5.6lbs (2.5kg)
Operation Temperature
32 °F ~ 104 °F (0 °C ~ 40 °C)
Relative Humidity
10% ~ 90%, Non-condensing
Power Consumption & Input
AC 100 ~ 240V, 50-60Hz, 60W adaptor
Product’s specification and availability subject to change without notice.
Certain product names mentioned herein may be trade names and/or registered trademarks of their companies.
GVI Remote Software Requirements: Windows 2000, XP, Vista or 7, Intel® Pentium® M 1.40GHZ or faster, 512 MB RAM
(1 GB RAM or above is recommended), Microsoft® Internet Explorer 6.0 SP2, LAN or Internet connection.
Ebay is where I purchased. I then bought a 500GB harddrive with nothing on it. Do I need to istall a LINKUX operating software? Maybe thats why the CD in the box would not work??!!