swin22

Hi guys I have 3 hdbw3300 ip cameras all with their own ip and ports. I had them connected to a hybrid Dvr and all were accessible through the network individually, however when I connected them to a dahua 5208-p nvr I get no picture. Do I need to default the cameras or even change some ip setting to get picture?

Hi guys Sorry for jumping in I this post but I don't know where else to look. I have installed a dahua Dvr 1604hfue hybrid Dvr sometime ago and I was asked to wire in alarm outputs for the customer to use with the idmss plus app for home automation. I connected a 500mA 12v power to the 12+ port on the alarm and the outputs through relays. Everything worked perfect for a few weeks until I was told the Dvr all the lights on the panel are flashing and so are all the outputs. When I disconnect the power to the alarm outputs it stops and I have to restart the Dvr. Also when the Dvr front panel is flashing no recording happens. Any ideas and thanking yup in advance for any advice

Hi the Dahua dvr still available?