george_cc

Hello to everyone. I would like you to help me in order to determine which of the following cameras is going to give me better Image result. I have found two cameras with the following characteristics: The First one is: with CMOS OV 1/4", 1000TV Lines, Varifocal 2.8mm-12. and IR Cut off The Second one is: with Sony CCD 1/3", 700TV lines, Varifocal 2.8mm-12 Which one of the above you think is better? By "better" I mean which one of the Two will give me a more Clear & Sharp View. Any personal experience or opinion will be very helpful to decide.. thank you

Dear Don Stephens, thank you once again for your feedback in this matter. Now, about Longevity, it was going to be my next question to you, but you answered already. I will definitely go for the Sony CCD for all the reasons we discussed. Also, are you familiar with the "auto tracking" feature? Is it something like Digital Zoom to the moving object? I hope I can disable this feature via the OSD..

Thank you again. The sony is also sligltly more expensive, but, i dont care too much about that. I am going to install these cameras in a very close family member and told me to go for the BEST! so...do you suggest to select the Sony, despite it is 300TV Lines less than the CMOS? To conclude: 1/4" CMOS 1000Tv Lines < 1/3 700TV Lines Sony CCD, is that right?

Dear friend, thank you for your reply, below, there are some more specs: For the first 1000 TV Line CMOS: Sensor: 1/4" CMOS (OV9712+AVS03P) + IR Cut filter, Low Lux. Resolution: 1000TVL/720p -Picture Elements 1280(H)×800(V) Sensitivity: 0.001 Lux (F2.0). Varifocal 2.8~12mm (Manual Iris). 36 IR LEDs ¢ 5 mm, MAX 30 m. Other: UTC, BLC, HDNR,BLC, Smart D-WDR, 3D DNR, μενού OSD Auto-tracking και Auto-zoom. 12 VDC. For the second 720 TV Line Sony CCD: Sensor: 1/3” SONY ICX811AK CCD & SONY Effio-A (CXD4151GG) DSP, Low Lux. Resolution: 960H/720TVL. Sensitivity: 0.001 Lux (F2.0). Varifocal 2.8~12mm (Manual Iris). 36 IR LEDs ¢ 5 mm, 30 m. Other: BLC, HLC, D-WDR, 2DNR, UTC, OSD menu. 12 VDC.

Hello everyone, I have set an 8 - Channel CCTV system. I would like to send the Output Video signal to 2 TV's, both of them have an RCA Input (Yellow). I am thinking of Using an RCA Splitter from the output of the DVR and send the signal to the Monitors. The Distance for the first Monitor is 20m and 30m for the second one. I am about to use a Simple Coaxial Cable (like the TV antenna) and terminate it using RCA connectors. is it going to work? Iam reading lots of stuff on the internet but I can't conclude which on is the best or the appropriate one. Any help will be appreciated, thank you. George

Hello everyone. I have a serious problem.. Yesterday I formated my PC, didn't change any hardware at all. Before the format I was able to Live View my 4 Cameras through my iPhone 4s. After the format I am not able to live View by using iView, however the RPB View (recorded videos) is working like a charm. I am also able to Live View through my Computer BUT not live view on iPhone.. Why is this? Iam getting mad.. The Ports are all open, I double checked that. I tried to Disable Direct Draw but same result --> nothing Please save me for one more time guys...

Hello everyone, I tried to enable the mobile view today, in order to be able to live stream video from my shop to my iphone using GV-iView, but as you can see in the photo, the Check Box is deactivated and therefore I cant select it. The same thing happens with 3GPP. Any ideas why this happening? The Web Server is working great, I am able to live stream through Internet Explorer on my PC. Thank you

Hi, Yes, I am the one and only User...Is there anything I can do in the settings? Edit: I just found the reason why it is disabled. If you select at General Tab --> Enhanced Network Security, the mobile view is disabled. Below is the screenshot with the explanation just for shring with you. therefore, my problem is Solved, thank you!

thank you very much rory, just 2 lines of comment but you finally helped me to complete my Geo Setup! All I need is now up and running! Thank you very very much George

Hello! For one time more I am gonna need your help! Here is the deal! I have Configure Geo System as an HTTP Server. I have open from my router a port and I have map it to Lan Port 80 (HTTP). From my Home PC I can access the Geo System at my work (via browser and Multiview) and view the Webcam Interface. However, when Loading the live stream I get a message "Can't Connect to Server" and here I am.... Why is that; I have correctly forward a public port to a lan Port, I can connect but no live stream.. Please help! thank you George

Hello everyone! First time visiting you site and becoming a member! Just 2 days ago I set up a Geovisio GV-600 System. I am very happy with the Quality and everything! However I have a little problem! The DVR card is set up on a Server PC on my local Network. What i want is to access the Geovision System from another computer on the SAME LAN. I tried to do so via the Twin Server but nothing. What I am doing is to enable the Twin Server and then from the other PC on my local network I type on mozilla browser: 192.168.2.2:9056 but nothing happens. What am I doing wrong; Thank you very much! George

Hello again, first of all sorry I am so noob but I am very-very new to all these things! Initially, I thought that in order to make another PC in my Lan to act as a "viewer" of the Geo System I had to enable the Twin Server setting. After some experimentation I found out that the the Web Server Tab will do the Job. Now I can view my cameras from my browser by typing the IP address of the Geo and also from the Software multi-view that came with the Geo. Now I am trying to understand about the Twin Server Setting. What does it do? When I am opening its windows I can only change the Port number and to search for UPnP router (by the way, I have enable UPnp in my router and still it says no UPnP device found). So, in simple words, what is the operation of Twin Server? It will do my Life easier if I set up correctly? Once again thank you for your patient. George

I have disable windows firewall in both machines. I have turn Twin Server ON I am typing the address in the browser but nothing happens, page fails to load Edit: I have just enable the HTTP Server and its working via the LAN. But really, is it supposed to work with the Twin Server Service; What is the defference between them?