dechowireless

all i know is the best 16ch NVR dahua has can only support up to 4 channels 1080P...

If you live in Houston I'll install one for you!

so i concluded im building a hybriid dvr... any recommendations on parts guys? i want to house it in a micro atx chassis.. any input appreciated thanks!

thanks for your response! i just need to hook it up to flood lights and wire to dvr to send our sms and email alerts.. hope the zmodo dvr (ZMD-DD-SAN4) can do this?

nobody?

thanks everyone im going to find a local power source and try to fig reroute power... cause i rather do that and use the already installed BNC cables rather than run 3 more cables and get torched in this houston heat.. im learning more and more everyday thanks buds for your time!

Ok so im upgrading an camera system at a collision shop i ran upgraded 8 cameras already but i have 3 that run all the way to the back of the shop.. which is 300+ft... my problem is.. i have 3 rg59 w/power cables.. 165ft +100ft+100ft.. the camera location is all the way in the back so i bought F-to-F BNC adapters.. to connect them and run the cable.. well after i ran it.. the video resolution is crap and the picture is B&W!! it too me 3 hrs to run this damn cable through a pin hole and along a 30ft roof! im so pissed... any suggestions? am i losing power to the cameras? why are they B&W? " title="Applause" /> Also the guy that did the install before used a PC Card DVR.. could that effect it any? thanks a lot for any suggestions! Ill get a picture of it soon if i can and upload it..

i totally forgot about using baluns.. i should try those.. im still a amateur compared to all you guys only been doing this since 2010.. and i just got into digital ip.. hopefully those are more fun and a headache to deal with... haha numb- i didnt bring my voltmeter yesterday so i didnt have a reading unfortunetly..but i have to assume its a power issue.. it would work on a single cable running straight from the DVR.. ty for your help tom- again no meter didnt get a reading at the camera end.. but my powersupply was a 19ch powersupply box.. dont know where the box was from cause it was there when i came to upgrade the system.. ty for your help soundy- i will do the local test soon.. but i think im going to buy video baluns and run cat5... itll be less of a headache i think.. haha i have 3 cameras left to run to that side of the building.. ty for your help I have never ran baluns before.. but they look easy enough to use.. any advice or tips using them? i bought a box of 1000ft cat5e for my ip cams i got but i might just pick up another box.. any recommendations on what type of baluns i should buy guys? thanks for all your help

How is your ipcams hooked up?

i forgot to mention i plug the cameras into the dvr using the 165ft and it was color and the pictures was crisp camera is 650tvl.. but when i add an adapter and connect the power ends it gives me black and white...

i bought them from ep-survellance... they were precut and made already. it didnt splice the power i just connected the ends to ends and ran it also i got a F-to-F BNC adaptor and connected the RG59 cables... do you think my current is not strong enough to power the camera to make it color?

i know this is a old post but this seems to be the type of dvr im dealing with.. does anyone know if this dvr has a android or iphone app client? thanks

Hey guys thanks for the input.. I tried to call my isp to open my port I went through 4 reps.. Then a salesman.. Then I think after I said no to "business class" they sent me to india to blow me off... I have done installs for a bunch of small business running t1 lines and for me to open a port it is as simple as call isp tech support and they release the port easy as that.. I have never been in more loops in my life... I have a friend that is a network specialist, guess I willbe taking him out for drinks in exvhange for work this wkn... I have 4 dahua ip dome cams and 4 dahua outdoor bullet cams.. Im instructed to config my ip then view my cam through a webcient which when my browser screen pops up I get a invalid website page... My router is totally screwing me... I guess im so use to analog systems.. Ip systems are a pain in the ass.. Ill try to submit some pic of the error or just the config screen after my install tomorrow.. Thanks for all the help guys!

its closed.. so if i call isp and open it.. i can see my stuff?

do you have to call uour isp and open port 37777 so that you can view these ip cameras? i been stuck on installing them for a while! thanks for your help!

I have a cousin in hongkong, ships it to me.. want one? i have 4 coming in in a wk.. you can paypal if you like.. i dont think anyone here in the states have them.. I'm interested - depends on how much you are asking What model of cameras did you get? i got the dome 1.3 mp and 2mp and some of the outdoor bullet cams.. 1.3mp and the 2mp.. got 5 of each! i love them! great quality for your buck!

I have a cousin in hongkong, ships it to me.. want one? i have 4 coming in in a wk.. you can paypal if you like.. i dont think anyone here in the states have them..

thanks man! also anything i should know for cat5 wires? any good ones to use or look out for? thanks again bud

So do you think i should use those nvrs for my install not all 20 cams are goin into 1 place i have 2 5ch installs and a 8ch install

well i got offered the nvr 16ch stand alone for $260 http://www.dahuasecurity.com/English/product_info.aspx?type=336&&css=0&&id=2 i also konw that there is software nvr.. but if i just stick a 3 tb hd into a computer isnt it the samething as getting a standalone nvr? all it does is stream it to the nvr and record samething a computer does.. and thanks for the quick reply soundy!

I have setup a 16ch system 12 dome cameras and 4 ptz I wired everything good I had 2 options of a power a 18ch box or the big tails that split into 5 or 4.. I used the pig tail splits I currently have 2 5split ac adapters and 2 4split ac adapters.. When I plug it all up.. I have major interference runing through my dvr.. Which is a 16ch dvr from zmodo the d1 hdmi out version... Someone please help! How do I get rid of this interference!

thanks bud

im still shopping for a good nvr.. any suggestions?