fel1976

well,not sure what model of the box,has been installed by another company,but its have been done more than 4 month ago so far i think its 4 USB devices is plugged to PC in device manager its show GV-SERIES USB PROTECTOR,not sure what is it ,this devices working true tcp/ip ports 5 hard drives installed in the PC,I also tried to remove this drives from dvr soft ,try adding one by one and each time different ones. today i make a small change as well,change codec compression from Geo mpeg4 to Geo h264 could tested only on the weekend when will be more traffic,its in the lounge bar.

Hi all. i have a client with gv-1480 runs 16 cam for last 5 years. its working totally fine ,running ver 8.5 for last 6 month,no issues. recently start crashing the pc ,check everything already,hard drives,memory cpu ,all in good working condition. its crushing only when recording with lot of movements .if no body in the place and its recording ,no problems,only when all 16 cameras recording. any ideas ???? thanks a lot.

Ram during recording is only 35% load. CPU is almost 100% but as i sad before. I run crash test on cpu. No problems. System is running on 8.5 version for almost 2 years. One change has been made other company installe pos units. Dont think its can be a reason.

No blue screen. Just frozen. All the cameras on motion detec only. Need to try make simulation of the problem put all the cameras on full recording. About harddrives only one is attached to the system. Its meen system recording to one hard drive Only.

well,its just crash on me now after add another camera to recording so far its was working on low trafik,as soon add few more,bym,crash every time need to reboot pc ,nothing alse is working . is it any option to test dvr card for errors ?? also its load the cpu almost over 90% but i diid crash test on the cpu with some utility and its pass woth no problems,also durring recordin memory test show no more than 35% loading. dont know what alse to do

well,my event log show nothing in windows.this is annother problem is dvr it self have any log file option ???? try to search but no result

well,running now 13 cameras same time ,so far working good .also i think maiby one of the hard drives cosing the issue testing now client is not very happy with solution ,but need to run all the cameras the same time .