Hi there,
I have been lurking this forum for a couple of days now.
Just learning, reading, getting ideas on a CCTV systems.
I am new to CCTV but not so much in computer networking.
So I just bought a 1700sqft house and the area is known to have some burglaries, so I have been looking for a camera system as a deterrent and just to have fun with as a new hobbie.
Here is my system layout:
Dahua ESDV-PROLINE-8 8 Channel Security W/ H.264 Compression and D1 Resolution
RG59/u Coaxial Patch Cable - BNC
8CH Passive Video Balun Receiver & Power Supply Hub (VPS)
Cat6 cable
Eastern CCTV EV01P-VP-T Passive Video Balun
CNB VCM-24VF Outdoor Dome Security Camera 2.8-10.5MM True Day/Night 600 TVL
Costar CDC2500HX PTZ High Speed Fastrax III Security Camera
I want to make sure I understand how this works,
I would have the DVR recording motion, DVR will connect to LAN so that I could watch over LAN computers aswell as on the phone and computers outside LAN.
Having a Passive Video Balun Receiver & Power Supply Hub (VPS) connected to the DVR via BNC Coaxial Patch Cable then outputing to Cat6 cable then to individual EV01P-VP-T Passive Video Baluns and connect the wires from that to the cameras.
That would have video and power all in one cat6 cable via the Balun Receiver & Power Supply Hub?
One thing I am not sure on is how to hook up RS485 connection for PTZ.
With the model balun EV01P-VP-T, it does not look like they accept a RS485 connection.
With LTS LTA1010 Pair Passive Video Balun with Power connectors on Amazon it looks like they may have two screw terminals for inputs.
Either way I would not be able to have an output for RS485 on the VPS.
Any ideals on how to controll a PTZ in this system setup?
I have a crude diagram of the setup i want to accomplish.
I am still have not made my mind up on if I want a 4Ch or 8CH system, but these are the components and system design i am thinking of.
Any ideas, tips, comments, or suggestions are more than welcome.
Thanks.