chongsparks

Hi All, Im in need of a bit of advice, What i want to do is control the PTZ via the jostick controller when at home but also be able to control the PTZ via the DVR when not at home using online software ? Is there and way i can connect both devices to the same PTZ and have them both work as they should ? Many thanks in advance CS

Anyone know ?

How would i terminate with a resistor ? what type of resistor would i need etc ? Thanks CS

Is just a chinese ebay one

Hi, I conected as said above but if the joystick is connect the dvr can do nothing. the dvr, pc or mobile phone will only work if i unplug the joystick.. any ideas ? Thanks in advance CS

Can you not remove button cell battery inside to revert passwords back to factory ? this does work on some dahua units ive heard. worth a look inside id say

Hi All, Ive got a DH-DVR1604LE-AS and when i playback video direct on the dvr i can not fast forward all channels at the same time. anyone know how i can get it to fast forward them all at once. Many thanks in advance CS

Hi Tomcctv, So i run a/b from joystick controller to a/b on dvr then from a/b dvr to a/b ptz, 1 pair at controller, 2 pair together at dvr, 1 pair at ptz. Is this correct ? sorry if im sounding a little dumb, i just dont want to damage any of the equipment so im just making sure this is what you mean. Many thanks CS

Hi, I have a 16CH Dahua LE-AS series DVR, it does support PTZ as it has PTZ A/B output on rear. I will be using both mobile and pc depending on where i am at the time. The dvr will control the ptz on its own and the joystick will work the ptz on its own. I have not tried both wired together as im not sure how to wire them I just used A & B either at the dvr or at the joystick. ideally id like to wire them both up permanantly so i dont have to keep swapping cables every time going away from home. Many thanks CS