Derrick
Members-
Content Count
6 -
Joined
-
Last visited
Community Reputation
0 Neutral-
Hikvision DDNS with multiple cameras
Derrick replied to Derrick's topic in IP/Megapixel Cameras and Software Solutions
Thanks MindTwist. I was aware of that, but it did not work, not in Chrome or IE. I did read somewhere that it would only work if the camera was plugged into the router, not with the camera plugged into a switch which was plugged into the router. Something about port forwarding the router to the switch. I don't know, didn't get the deep into it. I am able to accomplish what I want (for now) by being able to view them remotely with iVMS. I am not that concerned with accessing the cameras to make changes... yet. In time I will research it further and eventually get it figured out. But by then I will have an NVR which will change everything again! -
Hikvision DDNS with multiple cameras
Derrick replied to Derrick's topic in IP/Megapixel Cameras and Software Solutions
Every time I have changed the http port in the camera settings I lose access to the camera and have to reset it. This time, after resetting, I changed only the server port in the camera settings. Since i can't find in iVMS where to change the port, I just used IP/Domain and put in my IP (that I can get from hik-online) and changed the port to what I changed in in the camera. Not the most convenient way, but it works. Now to fix the IR filter that sticks causing purpleish picture. -
Hikvision DDNS with multiple cameras
Derrick replied to Derrick's topic in IP/Megapixel Cameras and Software Solutions
Thanks Joey. Which need to be different between the two cameras? Defaults are: HTTP PORT: 80 RTSP PORT: 554 HTTPS PORT: 443 SERVIER PORT: 8000 Which need to be changed and port forwarded? I know how to port forward (the one camera is working) I just don't want to change anything that doesn't need to be changed. -
Hikvision DDNS with multiple cameras
Derrick posted a topic in IP/Megapixel Cameras and Software Solutions
I have searched and can not find a solution to this problem. I have two hikvision cameras and have added them both to hik-onlike.com (DDNS service), however, the hik-online assigns the same external ip address to both cameras. Obviously, they can not both have the same IP address, so, how can I get each camera assigned its own IP address in hik-online? I can view each camera via internal IP, both directly and with iVMS 4200/4500, but viewing them via the internet I can only access one camera (using Hikvision DDNS). Please help! -
IP security camera setup decisions...
Derrick replied to Derrick's topic in IP/Megapixel Cameras and Software Solutions
I understand the M1054 isn't top of the line, and it's not the camera that will be in the final instalation, but the one that I have right now serves its purpose; to allow me to monitor the interior of my home during the day while I am at work (at least one room). And the included Axis software allows me to record triggered events should someone be walking around in there, as well as send me a text messge with photos. Light isn't an issue (yet) with what I need, if someone is in my house at night, I probably don't want any photographic evidence of what happens next. But yes, in the end there will be much better cameras (likely domes). As for budget, I don't have one. That doesn't mean it's unlimited, it just means I am open to paying for what I get. I am not expecting a 10MP, 50x zoom PTZ for $200. Nor would i be willing to pay $5000 for one since I don't need one. But if I saw one for $1000 hey, why not, right? (FYI, I was just tossing $$ figures out, I have no idea what a camera with those specs would run) I am figuring around $600 per camera for a balance between what I want and what I need. Things like outdoor, vandal proof, etc. might add a few more $. But I have to make sure I'm not spending more in protection than what I am protecting. LOL Yes, I understand that cameras aren't the best protection, and often they aren't helpful in identifying intruders, but it's a fun project! And it's fun to show people that you can view your house while away. I would say that I could make some $$ as a side job installing these for family and friends, but they wouldn't spend the same $$ that I would. They would want the Costco bundle that I know from experience, installing them for a few people, are, well, they, um, the people were expecting much more than what they got. But hey, I tried to tell them. -
IP security camera setup decisions...
Derrick posted a topic in IP/Megapixel Cameras and Software Solutions
Long time reader, first time poster…. I have finally (after years of thinking about it) decided to install a few residential security cameras in (and around) my home (and as is probably too common, I am a few months late given that fact my home was burglarized earlier this year). My desire to have top of the line equipment is trumped by my ability to afford mid-range gear. So I am piecing things together slowly (read: adding things each month after the bills are paid) and I am at an impasse on the next step to take so I am looking to you (the forum members) to help me make a few choices. What I want: A system of IP cameras with PoE with a dedicated NVR (proprietary or PC) with remote viewing. What I have: Cisco 8 port router with PoE (4 ports), 1 Axis M1054 camera, old PC with Windows Vista running Axis Camera Station (free 1 camera version). Everything is currently up and running, albeit very disorganized (I have not completed the in-wall CAT5 cabling, so the PC is sitting in the middle of the floor, the camera is just sitting on a desk, BUT, it all works ) My dilemma: buy a standalone NVR or build a PC-based NVR. I first liked the look of the ACTi GNR-2000 stand alone NVR, but then I started thinking I could just build a mini-ITX PC that would likely have better hardware. While I couldn’t find specific hardware in the ACTi, but my current idea of a PC build would be an Intel mini-ITX, Intel i5, 16GB of RAM, SSD HDD for the OS, 2 SATA 6.0 HDD in raid 1, all in a small mini-ITX case (the PC I am currently using is a LARGE case, so I would want to build a new one, even if the current one is functional). One question, would Windows XP or Windows 7 be better for this application? I understand that with XP I would have to scale back to 4GB of RAM. Then there is the issue of the NVR software. My head hurts from reading about all the different choices. I will most likely have 4 cameras very soon, and possibly up to 8, just because it’s like an addiction. Also, I will probably stick with Axis cameras; not that I have brand loyalty toward Axis nor any dislike towards any other brand. So I was thinking that since I am using the Axis Camera Station VMS (Video Management Software) I may just purchase a license to have more cameras as I get them. But then I saw the Razberi RAZ-M4 and RAZ-M6. There isn’t a lot of information about them, but I like the idea of having the NVR, PoE, and VMS all in one neat little box. The price is probably a little steep (like I said, very little information about it), and/or it might be one of those cases where individual components are better than an attempt at an “all-in-one”. But I still like the idea behind it. So, I do have some time to decide, and I would like to hear feedback from everyone(and I will be scouring the forum and the whole internet researching) so that I can make an informed decision and get a quality product that yield good results. I apologize for the length of the post, and I realize few will read it in its entirety and even fewer will respond, but those that do I trust will have a sincere response. Derrick