h8that4u

Try coming out of the modulator, with a coax line to a splitter (going to one of the outs), then the line coming from the back of the DN 222 receiver that is feeding the tv 2 output will go to the other out on the splitter. Then run a line from the splitter in to the diplexer uhf.

Hello all, figured out the issue and thought I would post to let others know. Open DVR unit and unplug data cable and power cable from the HDD. Then plug the main power back in, if the unit boots up properly you have a bad HDD, replace and all is well, if it continues the "death roll" then you have a bad main board. At that time start shopping for a new updated unit.

Hello all I have an Eclipse Orbix 16 mx DVR, that when I got to the office this AM, all it was doing was cycling thru the lights on the front (Power,HDD,Internet) and the monitor will display the cam images for around 30 sec's, show "Please wait Initializing system" then will go blank and start all over. I have tried unplugging the system for 15 min's and plugging back in and it still does the same thing. Any other suggestions on how to correct the issue. Thanks for any input and suggestions.

Why not use a VGA splitter, removing some of the connections that you have. VGA out to splitter, then single VGA to each monitor. MonoPrice has a few of these that you can get for under $20.