shere

Hi, I recently purchased a CNM Salva 8 Channel DVR Unit, it outputs fine via a Monitor put when I try to use the output socket at the rear for the television there is no signal. I have tried disconnecting the monitor but still no joy. I wanted to connect the cable to my distribution unit and then output to all of my screens. I have connected directly to a tv via the video output socket but no signal. Any ideas?

I'll give that a go, it worked via the rf modulator. So I converted the signal to scart from BNC using a RCA lead. I then plugged the scart in to rf modulator. The outpit of the rf in to the distribution amp. This works fine. If I can get away with using the rf modulator then even better.

I tried connecting the 'bnc output' to the input of the rf modulator and then the output of the rf modulator directly to the tv. There was no display. RF modulator works fine whewn connecting to a dvd player via a scart socket and displays without issues. I checked the settings, I cannot see anything individual that I can select for it to be operated via the 'bnc output'.

Thanks for the advice, I have a rf modultaor. I'll connect that in and then the output I will put in to toe distribution amp. Is the signal output from the 'BNC' different? What is it supposed to be connected directly to?

Thanks for the advice, this is kind of what I am looking for. Why dont I get output direct from the 'bnc output' in to my TV? I need some sort of connecton so that I can plug in to my labgear distributed amplifier. Would I have to purchase this scart connection and then plug in to a RF modulator? Thanks.