Charlie

Not one logical drive, but it should have no issues seeing all drives. We have built a number of systems with 4.5Tb internal storage, 6x750Gb + DVDRW & OS drive.

Don't be concerned by your choice of hardware, that system is by far and away more than capable of running a demanding Geovision system. For a long time we used Athlon socket A, then 754's,then 939's & now AM2's. Whilst Geovision them selves don't test AMD based hardware, they do accept that in general few problems will arise - In fact many recent issues with card stability has been related to bad Intel chipsets. Using H.264 compression you should expect 1.5Tb to last you a good month if not more when working on a VMD basis. If you’re talking time lapse, then considerably less. As an example a typical system for us would use a 3000+ athlon64, 512mb DDR, and a motherboard with integrated graphics (ATI). We've used this same setup on everything right up to 1480 combo cards - no issues.

Sounds like a lack of graphics card driver or directx.

Orion I don't believe the *.ini files hold the key to the language used by the Geovision system, though I may be wrong (and would liked to be proven wrong). As far as I am aware to get different language version you must buy your Geovision hardware/software from a distributor in that country - Geovision are trying to offer there distributors exclusive markets that can't be covered by other Geovision distributors from different countries. Basically it stops you going to say a French Distributor to get better prices on a Swedish version of the software.