chomber

1&2, I have a Dahua 2100c bullet and when I tried to setup FTP, my cam got totally fckup and web-interface didn't started after the setup at all!. Had to do full reset on camera side. 3. You can try http://ip-address:9988/onvif/media_service/snapshot well you get what you probably expect these chinese, cheap but not perfect quality Dahua is doing some development on ONVIF side and that's probably the reason why there are some undocumented features like that snapshot, also it has telnet open and hard coded root password so I wouldn't put my cam on unsecure network! btw, where did you bought your cam? From Finland? heippa!

Dahua has similar configuration vulnerability via telnet you can access the camera. username: root password: vizxv

yeah works for me too but would like to get motion detection working with zoneminder.

What zoneminder and ffmpeg versions are you guys using? I have't been able to get it working either with IPC-HFW2100 model and zoneminder 1.25.0 and ffmpeg version 0.10.5 VLC plays the below url just fine but zoneminder has following in the log FAT Unable to open input rtsp://admin:admin@10.0.0.71:554/cam/realmonitor?channel=1&subtype=0&tcp due to: Success zm_ffmpeg_camera.cpp 95 Source Type: ffmpeg Source path: rtsp://admin:admin@10.0.0.71:554/cam/realmonitor?channel=1&subtype=0&tcp Source Colours 24bit colour Capture Width (pixels) 1280 Capture Height (pixels) 960 Preserve Aspect Ratio () Orientation normal any ideas?