Rudie

hi, ive done this in the past but fiddly when im in that power supply as its quite tight i was hoping there was a more perm fix i did notice that the internal switch next to the red/black connectors doesnt actually do anything when flicked back n forth? not sure what this is for - maybe a reset switch? based in midlands.

Hi it’s a qvis 16 port power supply like a cabinet type one

Hi im running an onyx 16ch apollo 4x with 15 2.4mp cams running coax cables using TVI. issue i have is that after a power cut/reboot, a couple of cams never come back online DVR sub window is blank and the log says No Bitrate (enc) and channel number if i power cycle the DVR, all cams may come back on but alternatively another 2 cams will be offline. is there any setting changes i need to make? The encoding is the same for all channels- bitrate type is VBR Any advice appreciated. Thanks.

west midlands...

VIPER-4K-8 £300 with 2tb hdd from europe (asked for quote withouth hdd) to £360 for a barebone unit in UK (i have 4tb hdd already) Q4K-TUR-FW36 Around £50each

Sure will do. Will check and post what I find on here. Thanks.

Thanks tom great advice much appreciated will look out for a unit now.

Thanks Tom, so would I need to stick with qvis cameras for both ip and coax? Or am I able to mix camera brands with this dvr? Dvr looks like exactly what I need, will stick with same internal cams I think as u advised.

thanks tom. will take ur advice on hikvision. its for home, mainly external but some smaller cams internally on access points. would i be able to go 4k with the hybrid solution? if so are there any u recommend? thanks.

Hi i currently have an onyx 4-in-1 16ch dvr running coax to 15 dome cams mainly external 2.4mp onyx hd cams over coax using tvi. Daytime pics are great, nighttime is ok, not the best. my question is that what is the max camera resolution I can get from current setup? contemplating upgrading to a 4k system but not sure whether to stick with onyx or switch to Hikvision as im seeing these everywhere now? any advice appreciated. Thanks.

Hi, Im currently using MEye app to access cams and use remote playback. But sometimes the playback doesnt work at all remotely. Is there a better app (preferably free) to playback HD TVI cams? Thanks.

Yes cam is at front of house and gets the sun from 12pm onwards so definitely enough light. I have covered the cam and can hear the click and the leds come on. It isn't stuck in night mode

Hi the cam is definitely set to tvi. I can see the ahd option and there is an auto option too but defo set to tvi, but still B&w. If I hard reboot the dvr, it comes up colour but then eventually goes B&w. I may just change the cam to onyx.

Here is the DVR and camera...

Camera says on the box HD-tvi 2.2