jbak

Are there any cctv cameras that have an HDMI output?

This is the summary of what we tried to do: 1080p HD-SDI cctv camera >>> 25 ft hd-sdi cable >>> HD-SDI-to-HDMI converter >>> 6 foot HDMI cable >>> HDMI monitor I apologize if this is the wrong forum, but I don't know who else to ask. We're not a video company, but our customer requested as part of our equipment package that we provide a live video stream from a cctv camera to an hdmi monitor 25 feet away. The purpose of this is so our customer can install a robot-mounted camera inside a spray booth and transmit the live video to an operator 25 feet away. Seemed like a fairly simple request, but now weeks later we are unable to deliver on it. I'm hoping may be someone here can shed some light on our problem. No matter what we try we keep getting the following error messages on the monitor: https://dl.dropboxusercontent.com/u/9777086/Converter1.jpg https://dl.dropboxusercontent.com/u/9777086/Converter2.jpg The monitor that our customer has is Dell P2411H, it fully supports 1920 x 1080 60hz. But, to make sure, we have also tried 3 other monitors, including: Samsung SyncMaster PX2370, Asus VE249, and one other. They all support 1920 x 1080, yet all give the same error message as above. The cameras we have tried so far: Q-See QH8005B 1080p SDI Bullet Camera (Grey) Vitek VTC-BHOCR2812 2MP Outdoor IR HD-SDI Vandal Bullet, 2.8-12mm GW Security Inc GW788HDSDI Professional 1/3-Inch 2.1 Megapixel CMOS 1080P HD-SDI Outdoor Security Camera with 1920 x 1080 Video Output and Vari-Focal 2.8-12mm Lens All 3 cameras are advertised as 1920 x 1080, HD-SDI cameras. The SDI-to-HDMI converters we have tried so far: Blackmagic Design Mini Converter SDI to HDMI with Embedded Audio AVUE SDH-R01 SDH-R01 HD-SDI TO HDMI Lenkeng SDI HD-SDI to HDMI Adapter Converter for Driving HDMI Monitors 1080P All 3 converters are advertised to convert 1920 x 1080 HD-SDI video to HDMI. For cables, we tried different ones just to make sure it wasn't the cable: 5 foot Blue BJC High-flex HD SDI patch cable, BNC to BNC 100 foot shielded RG-5U9 And of course, we used high quality HDMI cables. Long, short, made no difference. So to summarize: 1080p camera that outputs SDI 1080p SDI-to-HDMI converter 1080p HDMI monitor And they never work together. We have tried every conceivable combination of the above, and never got a video. Obviously we're doing something very wrong or very stupid, or both, and any suggestions of what to try would be very welcome.

Joseph, sorry, I completely forgot to mention that you were the guy who PM'ed me the answer! I got so distracted with these cameras, but yes, thank you. If I didn't receive that tip from you I'd still be banging my head against the wall there. Unfortunately I could not try that SDI03 converter you mentioned, because that site did not have an ordering option, and this was something we needed to receive quickly. But I received another one the very next day and everything is working fine now. Thanks again.

Thank you everyone for responding, I have finally resolved the issue. If anybody finds this topic on google and is in the same predicament, here is the answer: The frame rate of the camera and monitor must be the same. Most monitors are 60 fps (Hz), while most cameras are actually 30 fps. A regular converter (like any of those listed in topic post) will work only for cameras that output 60 hz (like Orion). If you have a different camera, it probably outputs only 30 fps, and therefore you MUST use a scaler or a converter that accept 30 fps and outputs 60 fps. We have successfully used the following device: AJA AJHDP2Q HDP2 HD/SD-SDI to DVI-D Video and Audio Converter It is pricey, but works. I have ordered another one that is considerably cheaper, also by AJA, which outputs straight to HDMI. I will report back if this other one works, otherwise it'll have to be the one above.

Yes, I have tried 4 different monitors so far...

Because unfortunately this has to be a direct camera->monitor connection Only camera with HDMI out I found was made by Sanyo, but they're out of business. The only other thing I found was this vivotek camera: http://www.vivotek.com/products/model.php?network_camera=ip8162p&tab=acc It has a BNC analog output. I ordered it, but I suspect analog signal can't be 1080p. ----- another option is to use this camera: http://www.orionimages.com/product/CHDC-22SDHSC.asp with this converter: http://www.blackmagic-design.com/products/miniconverters/users/ camera produces HD-SDI (200m range), and converter changes it over to HDMI. Only question is if this camera has auto-iris, if it does, I guess I have my solution.

That's a good idea, is there any quality loss while running HDMI over cat?

I apologize if this is a noob question, but I can't figure this out with google. I have a regular 1920 x 1080 LCD monitor that has DVI and VGA inputs. I can't change the monitor, as it's part of a kiosk. I need to connect an HD camera directly to it, for live video view. The camera needs to have auto-iris and support 1080p resolution. It will be located approximately 30-50 ft away from the monitor. What camera can I use? Are there any such cameras that have direct dvi output? I was thinking of using a dvi repeater and just connecting directly to DVI input on the monitor. I imagine there is some industry standard way of doing this, to get HD live viewing. I really do not need any recording, just plain camera-monitor pairing, with no or minimal quality loss.

Not quite sure which camera on there I should be looking at?

Are there any resources online to see different model cameras with their screen shots?

We're looking to buy a GV-800-4. Could someone PM me a reliable online store to buy from, that has money-back guarantee and full warranty support from GeoVision? Thanks.

This is a bit of a two-part question as I'm looking for both a DVR card and software to go with it. We've had some instances of employees "appropriating" materials and supplies after-hours, so we're looking to install a discrete DVR system to monitor the entrances and work area. There'll be only 3 or 4 indoor cameras and there's no need for audio. Requirements for DVR card/software: - capture only during specified hours (5 pm - 8 am) - only motion triggered capture (preferably with sensitivity adjustment) - event notification (send an email with pictures or video) - remote viewing - ability to run in the background as a windows service and automatically resume operation in the event of a computer reboot We're looking for an established and time-tested solution. Any suggestions would be appreciated. So far I found this: [edit by mod - link removed] But doesn't say much about event notification.

I need to put a camera about 200 ft off. The problem is it's in another building which is separated by 1 ft wall of brick and sheet metal. Regular 2.4 ghz phone handsets work fine though, but I don't know if this is a good indication of how a wireless camera would perform.

Is there any difference between the two cards except for frame rate? 20 vs 120 With 4 cams that's 5 fps per cam vs 30 fps. How much do you really need? Is there a suggested minimum?

What is the best covert cam that you can buy? Not price-wise but picture quality.

Are there any stand alone 900 mhz transmitter/receiver combos I could hook up a regular CCTV cam to?

Are there any samples of what you can see through one of these?

See my post below. These are some of the cams I looked at so far. CVC-627 IR Night Vision Camera Extreme CCTV WZ14 Compact Day-Night

Are there any good bullet cams without IR? We could just get a couple of flood lights with motion detectors to put by the entrances. And btw, yes, all cams are mounted indoors with no direct sunlight exposure. Any heat they get will be from the walls and air, so I'm thinking color probably won't matter.

Would something like this work then for day/night? http://www.eclipsecctv.com/ECL-598HIM.html http://www.eclipsecctv.com/ECL-599.html Don't they have visible leds? Since you mention light from doors problem, we can install the entrance cams to the side or behind doors to avoid that. There's a lot of flexibility about where they can go. And about motion detection. Isn't it the DVR card's job to detect motion and trigger recording? If I get a geovision card would it do that? Or is there a need for special camera or separate motion detector?

Something you've probably heard hundreds of times, but boss says "do it cheap but so it's good enough." I take this as: a) color b) day/night visibility c) can see in distance d) doesn't die from heat

Whats the application? To discretely monitor an industrial facility after hours. Consists of an office space with an entrance and a main industrial area that's about 7,500 sq. ft. (like a hangar), which also has a separate entrance. We have materials like precious metals that have been disappearing and a strong suspicion that some of the employees have been taking them, possibly after hours. They're stored all over the place so we have to keep an eye on the whole area and be able to see what's going on in case someone shows up after work. It is a requirement that all cameras be installed discretely as to not arouse any suspicion, otherwise the responsible employees would become more careful if an openly visible system is installed. Also to catch any thieves, as we already had a break in incident before. Where will they be mounted? One will be discretely installed in the office in front of the main entrance. I'm thinking a wall clock is the only inconspicuous option, but don't know about its picture quality and whether it can see at night. Three more cameras will be overlooking the large open industrial area, hidden in cracks in wall insulation about 15-25 feet up, with one pointed directly at the entrance and the others overlooking the whole place in general. This is roughly how it looks just to get you an idea. What lighting is available? Fairly bright if main lights are turned on. Otherwise no light whatsoever at night, pitch black, you wouldn't see anything in front of your face. Unless someone turns on the main lighting, there's zero light. But, cameras have to be able to operate fine if the lights ARE turned on too. The cameras would also operate in the mornings and evenings when only daylight is coming in so it's fairly dark also. What is the environment like (hot, snow, etc)? Up to 130 degrees on bad days in the summer, walls probably get even hotter. In the winter the hangar temperature pretty much mirrors whatever is outside, down to below freezing. All cameras are for indoor use so there's no water or other elements. What is the budget? The cameras I looked at so far were up to 150 per camera. If there's a good reason to go higher, we would, but we have to be practical and consider how long they would last in these conditions. I have to say that from what I've seen so far black bullet cams would be the easiest to install and hide. But I have no idea if they could even see the whole place, let alone at night. I know they don't even have IR for true day/night operation. We are not really concerned about seeing the whole place at night without lights on, but at least the entrances should be clearly visible even in total darkness (so up to 30 ft night visibility with IR). Another thing is that they should operate in color in day mode. So, what are my options? If you're thinking "your price range is ridiculous, your only option is X, but it costs Y", I'd like to know that too, so we can make an informed decision. If the investment is worth it. Forgot to mention, all cameras will be wired and go to a DVR card.

Can you name all the cameras you think are better choice for the price?