machiner

hello i had the same problem. contact with bosch service. service should you send new frontpanel. that could be incompatibility version firmware frontapanel with dvr firmware or no booting program on frontpanel. i'm not a technician or programmer and i could be wrong but you try get new frontapanel. it may also be that your divar is brick and replace front panel not solve the problem. good luck

hello #for HD streams with high performance - SEAGATE SV35 Series #for DVR and few ip cameras (HD also) - SEAGATE Pipeline HD Series (quiet) i use SEAGATE Pipeline HD for my NAS also (DLNA, Movies, Photos, Music and ip cameras too). good luck

hello, for 1 monitor software Smart Viewer 4.0 for 4 monitors software Samsung Security Manager 1.11 (replaced Net-I Viewer) mobile app iOS & Android live and playback " title="Applause" />

I can't help You. I have no experience with Toshiba EHV16-480D good luck:)

SRD-1673D +960H (for 650TVL cameras) +32Mb/s streaming +mobile software (playback also) +pc software - ip cameras not supported - front panel > touch buttons - no loop video out - only 1 BNC SPOT

For Samsung SRD-1650: #firmware 1.14 #SmartViewer 4.01 #dedicated HDD; example: SEAGATE PIPLINE HD 2TB or 3TB model #use operator account to LAN connecting (don't use admin account) ...It must working !! ...If not than DVR is broken.

first check access to 1 camera. set DMZ on router on ip adress 1 camera if OK turn off DMZ and set port forwarding on router for dvr is: port range 554-558 > IPOLIS mobile port 558 or port range 4520-4524 > IPOLIS mobile port 4524 80 >IE login for ip camera port 4520 > IPOLIS mobile port 4520 rtsp 554 > VLC or other rtsp client 80 > login (IE or Firefox...) good luck

try telnet session with camera. this is last chance DiBos with h.264 camera ?? it will not work.

#1 live view. don't use HD streams for 3x3 and 4x4. use second SD low profile streams - You can save in favorites in BVC1.4SR2 #2 graphic card with 1GB or better - dual monitors. #3 check this. this is for BVMS: http://resource.boschsecurity.com/documents/Display_Performance__Technical_Service_Note_enUS_11493021323.pdf example Quadro 2000 will good choice good luck

#1 Smart Viewer 3.14 ?? #2 Can You connect from IE ?? #3 Check user permission in DVR #4 Do You have admin permission in Windows ??

Bosch NDC-274-P has CMOS 1/2,7". This camera is from economy line in Bosch. I don't recommend use this camera in lowlight location. If you are looking for high perfomance camera in lowlight mode than check new Bosch "starlight" camera NDN-733V02-P. I'm think that price will be comparable to AXIS P3364. The resolution is not only the most important parameter. Equally important are streaming bandwidth, frames per second and lowlight perfomances and IR cut in Day/Night cameras.

#1 Try add port 1756 #2 Check Video transmission in Network/Network...Details.... Change to TCP (HTTP port) #3 Instal decoder in IE or use BVC 1.4 SR1 with MPEG ActiveX 4.40 Good Luck

Bosch VideoJet X40 XF E if You want good quality for 700TVL cameras. This encoder support CF card recordings and than You can use BVC for live view and play recordings from camera for free. Price is higher but You have low power solution and You can use Adaptive Bit Rate encoding and transcoding for remote replay. These features are amazing. I saw ABR encoding in action.

Samsung ip cameras It's working but... You must stop recordings on sd card ( www access to camera) and than power off camera and take sd card. Play recordings PC windows 7/xp with SD Player from Samsung. Bosch ip cameras With firmware 5.52 and 5.60 it is not working with BVC 1.4 SR1 (Export Player) . I'm not test fw 5.70 play recordings only from sd card. Cameras with fw 5.70 have Dropbox export and now it's working ok. You must set up motion detection or trigger in camera and than You can download video recordings from Dropbox at the home and play on PC.

Hi I have the most information about the SAMSUNG. I'm not work in SAMSUNG and I'm don't want to sell You any equipments but I send You my advice - for free Your new DVR must have: # dual coding, first stream for record and second for mobile (iPhone) # application for iPhone with acess to recordings for free Most DVR in the market have application with live view only for mobile (iPhone/Android) and some of these DVR have paid application for play recordings. SAMSUNG have dual coding and mobile application for play recordings for free. Check this models: SRD-1640 (economy model, stream only CIF) SRD-1652 (economy model, stream only CIF) SRD-1650 SRD-1670 (realtime full D1) SRD-1653 (new, 960H) SRD-1673 (new, 960H, realtime full WD1) I know that Dahua DVR have live view mobile application for free (iDMSS or gDMSS) but I'm not tested new feauture PlayBack recordings and I don't know that PlayBack is for free. If other companies have mobile application for play recordings for free from their DVR please guys send information in new topic. I like to know about different models DVR and their special functions and new trends in DVR/NVR. good luck

Keyborad SPC-1010 not support control DVR. Keyborad SPC-1010 support only control cameras through RS485 connection. If You want use COAXIAL connection (PELCO C) with PTZ cameras (with W5 or SV-5 processor) and SRD-1650DC than You must use SPC-6000 keyboard.

Hello, Bosch released new firmware 5.60 for ip cameras but did not release new Configuration Manager 4.40. I can't change settings alarm IVA 5.6 with Configuration Manager 4.35. I have also problem with export video from camera (IE9) to Dropbox and FTP. The authorization for Dropobox and FTP is OK but camera does not transfer video. Does anyone else have this problems ?

thanks for replies. Does anyone have experience with Direct-to-iSCSI recording on Qnap NAS with Bosch cameras ?? If someone need this configuration I will send the setup instructions iSCSI on Qnap

update and upgrade firmware 1.11 Smart Viewer 3.14 iPolis mobile 2.1.1

#The poblem is delay between release firmware 5.60 and release other components Configuration Manager v4.41 and MPEG ActiveX 5.60.0050. I had only firmware without CM and MPEG ActiveX and therefore I had no acess to configuration IVA 5.6. #There was no information in release note firmware 5.60 about new IVA 5.6. There is still no information about changes in IVA 5.6. #Still Bosch does not have a central download site with actual new firmware, MPEG ActiveX, Configuration Manager and other programs BVC,BRS, VRM, BVMS (should be all in one place). I'm thinlk they could add functions in new Configuraion Manager (check new firmware available, download and upgrade firmware and CM and MPEG ActiveX). Thanks for reply.

BOSCH NBN-832V http://www.telewizjattm.pl/kamera/sopot.html Live stream from Sopot in Poland. Wowza Media Server stream.

IPOLIS Mobile work only with SRD-series DVR (h.264) and new SAMSUNG ip cameras (h.264). If You have DVR from SRD-series check firmware. In new firmware SAMSUNG changed defauts TCP ports to range 4520-4524 (ports in old firmware 554-558). For IPOLIS Mobile port is 4524. Check bandwitdth and frame size settings for live streaming in DVR. If You set bandwidth to high than You might have problem with get stream from dvr. Tested with IPOLIS Mobile 2.1.1 for Android. Good Luck

DiBos 8.7 not support ONVIF and You can't upgrade to 8.10 (BRS). Bosch Recording Station software and Bosch Recording Station Appliance (hardware with software) could work with http jpeg cameras but if You have ip camera with h.264 streaming I'm think that better solution is use ONVIF with h.264 for fixed cameras (without PTZ). Please ask dealer for BRS-BASE-04A license. This is cheapest license for 4pcs cameras. Good Luck

Hi DiBos v8.7 works with old models ARECONT VISION cameras (jpeg megapixel cameras) and old Bosch MPEG4 cameras (You can't use h.264 stream). If You like DiBos philosophy You may try to add second server with Bosch Recording Station software. New version 8.10 support ONVIF cameras. Please contact with Bosch dealer and ask him for demo version Bosch Recording Station software. Bosch has two type BRS demo. Try demo BRS with new ip camera. More details You may find in release note BRS 8.10 http://resource.boschsecurity.com/documents/Release_Note_enUS_9812095883.pdf From one client software (BRS Receiver) You may connect with DiBos 8.7 and BRS 8.10 server at the same time. Good Luck