toughman

I am working on my customer's old system (someone installed previously) and need the manual to setup the PTZ for the new DVR. I know, someone will say call the vendor. I did. Do you know what happened? The guy said they only serve the customers who buy the products from them. Asked me to prove that the PTZ was sold by EZcom. Can someone help me? Thanks, Roger

Soundy, Thank you for your information. Can it be programmed more than one shot a day at different times? Do I have to setup a FTP server to store the photos? Do all iqeye cameras have this function? Roger

I have a customer looking for a software/dvr to record 10 still photos everyday at a programmed certain time. I think this will be done with camera software and IP camera. Can anyone recommend a camera software? Thanks, Roger

We have 2 cameras at 400 ft, 1 camera at 600 ft, 1 camera at 700 ft, and 4 cameras at 1,100 ft.

I have one project need to run 8 cameras about 1,100 ft and there is no power source for camera at the camera site. Can anyone help me and give me any good suggestions? The camera can be 12VDC or 24VAC. Thanks, Roger

You can download it from their web site: usavisionsys.com

I am looking for a center video backup software: 1. Schedule backup after work hours. 2. Mulit-location video backup. 3. Support different DVR or NVR. If number 3 can not be done, it is OK to use the supported DVR or NVR. Thanks, Roger

As long as it works, conduit is not an issue. Thanks! Roger

Thank you very much for all your info. Some cables have to go along with the fluorescent lights and they will be very closed to each others about 2~3 inches. I am thinking to use cat5 cable with baluns. Does anyone have a better solution if the cable has to go with the fluorescent light? Thanks, Roger

How about using cat5 cable?

I think I didn't ask the right question. Can fluorescent ballast cuase problem if the rg59 is very closed to it? Thanks.

I have a project and the only way I can pull the cable is along with the fluorescent lights. Will the fluorescent light will cause problem? How come? Will rg59 or cat5 make different? Thanks! Roger

Have done this before? Did it work? Roger

I have a project and need your help... My customer has five different locations at different cities and already have non-ip cameras installed. The number of cameras is about 40 and no DVR for each site. He wants to have DVR or NVR to do recording for each site. In addition, he wants to view all cameras at his main office. What will be your solution for this project? Do you think a "central video management software" can handle all cameras through internet at the same time? Thanks! Roger

thewireguys, what kinf od DVR did you use? Thanks! Roger