windman

I am trying to add sound to a GE storesafe pro II imnot sure if I am using the wrong kind of mic or to long of run or if im not smart enough to connect two wires. thanks for help

thank you

Sounds like you dont have the right port open. Or my problem was when I left the location the DSL modem would go to slepp so o could not ping it .

Ok i know this is going to be a dumb question but im going to ask it anyway. At one of our stores we have the ge storesafe2 at the other store we have a "dvr card' in a pc. Can i use the wave reader to view from the card. Like I said this is going to be a dumb question. But you know what they say the question not asked is the dumbest.

I have looked at the diagram on how to install this and they make it look like the dvr is right by the probridge. I have about 30 or 40ft of the rj45 line to run do you think that will work and where do i get one that long? Thanks again for the answers you have all been very helpfull

my ip is static . I have everything screwed up now the network the dvr all of it im going to go to the town I think in the morning to work things out thanks for the help guys i may need some Thursday

I have port 1024 open and i have been able to connect from differnt computers and from the internal network. But sometimes i am not able to connect to the dvr on outside computers. I am not sure if it is something wrong with my dlink router or if it is my isp that is the problem. THe problem with connecting is off and on sometimes i can get on sometimes not. Thanks for all your help.

wow rory you on here all the time didnt expect to see a answer so quick

these are the settings i have on the dvr not sure if this helps you rory ethernet: enable hostname : -------- (letters and numbers here) dhcp : enable (not sure this shouldnt be disabled) Name service: disabled ddms update interval: 2 min ip address: the inside ip i have here the rest i dont have naything in except for the listen port which is 1024 I noticed that the dvr has a differnt ip since i changed out the router not sure if that happens all the time or only when the router is reset or putting a differnt one in. I did find out one interesting fact the modem (Airspan is the name of it) goes to sleep so it saves on bandwith while no ones is surfing the web. So i installed weather bug so it will be getting weather updates and getting outside of the router so the modem wont sleep. So i am hoping this is going to fix it.

yes i am using the wavereader 4.24.4 Is there a way to check the router to see if the port is open? How do i check each these router, modem or my isp. I know that i have opened the ports right but just not sure why it isnt consist. I mean if i am on the lan at the site i can connect no problem. I then can call someone and have them get on and see it but then when i try later or when anyone trys later it doesnt connect. No im not trying it thru the web browser. This is driving me crazy because the site is about 90 miles from where i live and with the cost of gas. Thanks in advance for any help and those that have already helped.

I am trying to connect using lots of differnt computers. I am not sure if maybe my router is going out and is not port forwarding or what it is. MY isp says that i have spyware imagine that that is thier answer to every problem.