1Diesel

Is anyone else randomly dropping gateways ? Sometimes it will work for half the day then I loose them all. When I go in to the setup they are missing user name. Once I fill in everything, all is good for a while. I have no issues on android devices. Thanks fore your time

it looks like you have to much of an angle. The tighter you can keep the angle the more time you have to get the image. With a 12mm your only going to be able to be 20 or 30 ' away depending on lighting and angle. Ideally you want the plate to take up as much of the image as possible so you have more pixels on the plate. I use a 2032 as well,but put a 25mm lens in it mounted under my mailbox. It does a decent job for what it costs.

Your hikvision will work fine. I have 6 of them. You just need to make sure you have the onvif firmware or newer. If you have 5.1.0 you need the 140217 build.

Install the smart client on your other pc. When it goes to login to local host change it to the IP address on your server on the other machine. Your password will be the same. For android download the milestone mobile app and set it up. You will need to use your outside ip address and set a port forward in your router to your server so you can view it outside of your network. You also need to make sure you have the mobile plugin installed in milestone. It should have installed by default if you did the normal install. Hope this helps

Ive been using go for a while and decided to try essentials,but after the install it always goes back to go. I have uninstalled all milestone software as well as removed some of the registry files, but it still reinstalls go. It seems like there are some files I'm missing that cause it to revert back to go.

I'm trying to use dual stream and everything seems to set up fine on the management side,but when you open the live view in the client all the images are stills. In the management software you can see motion with dual stream turned on. I have latest software and device pack. Tech support said based on their notes and firmware it should work fine. Ive tried it on 2032,3332, and the 2632 with same results. I am using Xprotect go and may download essentials and see if its a software limitation.

I have downloaded it in the past,but none of my cameras worked. Since then they have all been replaced with Hikvision. Im looking to either run the client on my mac through vmware or use the web client. Im currently using milestone but the client uses 80% of my resources on the virtual machine with 3 cores deticated to it. In playback 100% . I am using 4 3MP cameras. Thanks

I had to manually set up all my hikvision cameras in milestone. You might check and see if you have the latest device pack on their website.

Thanks for the info. I did copy it and hoped ACC would recognize it so I could change the volume,but I didn't changed the drive letter or unplug old drive.

The current drive is G: and the added drive is E: It is ACC 5

I have just added a new drive to my system and would like to move the existing video from current drive. I tried a few things, but had no luck. I copied the files to the new drive in hopes Avigilon storage would see it and give me the option to change the volume size. Thanks

I've been looking at these as well. I thought the same thing about the 3MP WDR over the 5MP, but have been told by a couple of integrators to go with the 5MP and I will not be disappointed. There are a couple of features that leave questions. From what I understand the adaptive IR can not be turned off or on manually. The Adaptive IR will use some of the emitters when in night mode until motion is detected the ramp up accordingly. Currently these are autofocus. I have not yet seen anything that is not on youtube. The videos do show promise, but I'm still trying to get more info.