NosIreland

tool version was 1.10, although now I found that there is 1.16 flash: General_IPC-HX3XXX_Eng_P_V2.103.0000.0.R.20120724.bin YPC1EQ04900141 if that is the serial as there other stickers with numbers looking similar to this one.

Hi Everyone, I've been following this forum for a while but a time came for me to register and hopefully get some info. I've been using dahua HDBW3300 for a while but the firmware was pretty old and did not allowed me to setup some features even though they were there. I wanted to upgrade but was putting it off. Today when I attempted to upgrade tool everything seemed to work fine but now I cannot access my cam over PSS or Web. I can still ping it on the same address. I assume something went wrong. I did port scan and found that port 23 is open. I am able to telnet to the camera using root and the password that I found in this forum but not sure where to got from here. The camera reboot every 2-3 minutes. Is there a way I can reflash it again through telnet? I saw that there is away to connect over Serial cable but different firmware files are needed. I would really appreciate any help. Thank you P.S. I know this is not best way to start posting....