evildog1

hi, this many help here is the connectors http://www.ebay.com/itm/320957424758?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 Run Pin 3 "Ground wire" to the -of the power BNC then then run another black wire to the - ground of the video bnc then run pin 6 to the power bnc + as showen in photo then run pin 2 to the + of the video BNC as Showen in the photo and here how to do it in the photo hope it help please let me know if it do, good luck

Hi, i can help u, with this and there is a cheap way and its easy, i,ll get back to you in a few hours as i gotta get work now, i post how to do it with pic when i gets home Also can upload a photo of the end of cable from cam u want to run to the dvr

yes the firmware now is buggy and and most of the features dont work on it.

i got this H.264 Compression Tech 4 Channel Embedded Linux OS D1 Digital Video Recorder thinking it could be upgrade with new firmware but there is no firmware out there for this model there is a page on the dvr where you can upgrade the firmware by usb so why put it there if you cant update it here is the company website who made it i do belive http://www.kongtop.cn/en/Products_show.aspx?ProductsID=105&CateID=48 and here the site i got it form "http://www.epathchina.com/h264-dvr-4816-ch-embedded-digital-video-recorder-p-1405.html" do any one where i can get firmware for this model or one that will work with this model and is there any way to save the old firmware that all ready on there in cause i needs it again.