twistertime

I am new to this forum and appreciate all information anyone can provide. I bought a Seesii is9300 cctv tester but this does not work on my Lorex 2mp and 4 mp cameras( video rolls on tester screen).I am wondering if anyone can provide information on what tester may work for these cameras as I only need the tester screen for setting up camera direction during installation( hopefully under $200). Thanks

Researched their site and it looks as though they make a few converters that will work.Thanks for helping with this matter

Hello and I am glad I have found this forum. Just bought a Pelco 4716 HVR and I am trying to integrate several American Dynamics Optima LT ptz cameras. The HVR says it accepts RS-422 and the camera says it supports RS-422 simplex. Tried hooking it up with 1 twisted pair and I have no PTZ control because the network is not recognized.Tried all protocals and baud settings. Network address on camera and the HVR were set at 1. Is it possible to make this work or will I need to have a remote controller that supports AD. I have included a Jpeg to show the info I am working with. Thanks for all your help. Tony

Just bought a used Intellex 16 Ch LT DVR with 4.3 software. There is only one 500 GB hard drive installed and this needs to be removed and sent back to the head office. There is no backup or recovery CD and the person I am dealing with cannot access anything other then the cameras because the system has a password that he does not know. I am looking at installing this system in my home and realize now that I will need to install a hard drive but I do not have a disk with OS and Intellex software so I was wondering if someone can help me with some options or next steps. BTW- the system is still active with the hard drive until next week when it will be removed but now on powerup it is asking us for a password that we do not have? Help!!!!!!! Thanks for your reply Tony

Talked with American Dynamics Tech support yesterday and they told me that I will need to purchase a hard drive and partition it with 20 Gig for the OS/SIntellex software, then install the hard drive and run the recovery disk. Well the hard drive and the partition I am ok with, the issue I have is that I need a recovery disk. The sticker on the front of the machine says I need a 0710-3088-0101 disk. Is there anyone out there in the CCTV community that could help me locate this. Thanks again Tony in Canada