clarkson

I am using a system called SiNVR, its from Siemens

Hi Have a strange thing happening on my IP CCTV system looking for some opinions. I have a HP Z420 HP workstation with 8GB of ram and a Navidia K2000 graphics card, I have a 21 inch monitor and a 43 inch Panasonic connected to the graphics card via a DVI leads. I have set up a view on the 43 inch monitor to show 9 PTZ cameras and use the 21 inch for a single dispaly and playback. When I have more than one image on the 21 inch monitor the images displayed on the 43 inch go slow and lag behind the live view of about 5 seconds. When I just have a single view on the 12 inch screen it is fine, I have checked the graphics card it is fine. Any ideas

Hi Guys I have a bit of a problem with some external cameras, Our CAD guy forgot to include an electrical symbol for each of the external cameras for a 240 volt supply. The 240 supply was to provide power for the heater, the problem is that the Electrical contractor has not wired mains to each camera. It looks like we have to install each of the IP box cameras in the enclosure with no heater. I was going to seal the enclosure with silcone and put silca gel in the enclosure to absorb any mositure. I am hoping that the camera will also provide some heat within the enclosure to aid any condensation on the glass Have any of you guys installed external cameras with no heater and was a success or if you have any pointrs Thanks for your replies

Hi Guys just wanted to introduce my self to the Forum. Looking forward to getting tips and expertise points Clsrkson