Hdn

I have purchased on Ebay a No Name H.264 DVR (circuit board #GM8182T)with v01.00.00.32(4CIF 128M) as firmware. I was able to configure the DVR (with some difficulty to understand the included translated manual), I can access the DVR , as long as I stay within my own network. I also configured it, for access outside my own network. (the easy and temporary way is DMZ) The DVR asked me for the username and password and the four section video Splash page would present it self, but not the video. The vendor told me it only will work with Windows explorer 7. Absolutely no further help from the vendor. That is where I am now. No remote video.( even with explorer 7) The Meye_WM aps for my mobile windows 6.1 smartphone works both outside and inside my home Network I have not tried email and FTP. I noticed an identification on the printed board "GM8182T XSA V1.6." and found, Grain Media in Shenzhen City, 518057 China to be the manufacturer of this board see http://www.grain-media.com/html/8186_87_82_83.htm I emailed them for more info and or an upgrade to the present firmware file So far no response and at this time I do not expect any response . There must be more info about this device because it is very frequently advertised on EBAY. Anybody who can shed some light on this no name device , it would be very much appreciated. I suggest to identify this DVR by the printed circuit board name "GM8182T"

I would help you if you could tell me how to copy the firmware from my GM8182T DVR

Try this for H.264 DVR (board #GM8182T). Simplified configuration, to access menu controls on a local network, new install or after factory reset 1. Default password is blank, no password. 2. Set Password in Main/Advanced/ Account (use for now 00000) 3. Set Network parameters Ip address, DHCP and port #’s ( Main/System/Network) Start with check mark the “ DHCP” to connect to the network and then change to a fixed address as follows . Uncheck DHCP see example: - IP address 192.168.1.52 (utilize the IP address given by your router) - Subnet 255.255.255.0 - Gateway 192.168.1.1 - Primary DNS 192.168.1.1 - Secondary DNS 0.0.0.0 TCP port 10000 http port 88 Monitor port 13499 4. Only Windows Explorer will work, and must be in “compatibility view” 5. IF NO NETWORK ACCESS, TRY TO CYCLE HTTP PORT SETTINGS http port 88/DHCP/80/DHCP/88/ DHCP off----after each change save (this worked for me) 6. If Windows explorer still cannot access menu, recycle the software ( no need to factory reset) Mainmenu/system/logout/reboot

On this forum, the DVR should be identified by something They are frequently sold on Ebay . I noticed an identification on the printed board "GM8182T XSA V1.6." and found, Grain Media in Shenzhen City, 518057 China to be the manufacturer of this board see http://www.grain-media.com/html/8186_87_82_83.htm I emailed them for more info and asked them if they have a firmware upgrade for the DVR So far no response and at this time I do not expect any response . I suggest to identify this DVR by the printed circuit board name "GM8182T" I also purchased on Ebay the No Name H.264 DVR (circuit board #GM8182T)with v01.00.00.32(4CIF 128M) as firmware. I was able to configure the DVR (with some difficulty to understand the included translated manual), I have not tried email and FTP. I can access the quad screen with video of the DVR on my computer within my own router network. For any outside network communication, I port-forwarded the DVR in my router and was able to try the outside network modalities such as the DVR remote quad screen and the monitor mode to watch streaming video on my Mobile windows 6.1 smartphone. I am struggling with the remote (outside my network) quad screen and controls The DVR asked me for the username and password and the splash page would present it self, but not the video. The vendor told me it only will work with Windows explorer 7. Absolutely no further help from the vendor. That is where I am now. No remote video.( even with explorer 7) The Meye_WM aps for my mobile windows 6.1 smartphone works both outside and inside my home Network Anybody who can shed some light on this no name device , it would be very much appreciated.

I have purchased on Ebay exactly the same unit with v01.00.00.32(4CIF 128M) as flash file. I was able to configure it (with some difficulty to understand the included manual), it is working, as long as I stay within my own network. I also configured it for outside my network. (the easy and temporary way is DMZ) When outside my network, the DVR asked me for the username and password and the four section video Splash page would present it self, but no video. The vendor told me it only will work with Windows explorer 7. Absolutely no further help from the vendor. That is where I am now. No remote video.( even with explorer 7) I have not tried email and FTP. I noticed on the printed board GM8182T XSA V1.6. Grain Media in Shenzhen City, 518057 China is the manufacturer of this board http://www.grain-media.com/html/8186_87_82_83.htm I emailed them for more info and or a upgrade flash file but they have not yet Answered me . There must be more info about this DVR because it is very frequently advertised on EBAY. Anybody can shed some light on this no name device , would be very much appreciated. I suggest to identify this DVR by the printed circuit board name "GM8182T"