fasttrace

Hey Beullwinkle, Thanks for the help as always. I cut the pigtail and crimped on a rj45 plug and it works. Cheers

I have a cat5 jack problem with one of my cameras, It's a Hikvision DS-2CD2112-I. One of the pins came loose from the jack. Could I cut the pigtails and put on another jack?

Disclaimer: I know nothing. I would use vlc.

I am only a noob A another question are you using vlc player to check if it's working? rtsp://camera_ip:554/ another one to try till the smart ones arrive

"Our NVR had no problem connecting to the RTSP stream once they were configured as hikvisions" from an amazon review http://www.amazon.com/CMIP8212-CMOS-Resolution-Bullet-Camera/product-reviews/B00C43IKUI/ref=dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1 try doing that Main stream: rtsp://admin:12345@192.0.0.64/h264/ch1/main/av_stream rtsp://admin:12345@192.0.0.64/MPEG-4/ch1/main/av_stream Sub stream: rtsp://admin:12345@192.0.0.64/mpeg4/ch1/sub/av_stream rtsp://admin:12345@192.0.0.64/h264/ch1/sub/av_stream from this viewtopic.php?f=3&t=30682

I got the IPC-HDB3200C So using google chrome, I can log onto the dahua gui interface page, see live footage for about 25sec~2min. and then it disconnects. I instantly refresh the page and it's no longer there, Wait a few minutes and it's back to the login screen. The same happen with internet explorer 10. So I downloaded blueiris to see if was just the broswers, but still it recorded footage for a minute loses signal comes back to record footage again for a bit I used the ConfigTool V1.06 that came with the cd and it does the same thing. See it for a few min and then disconnects. Here is the version currently installed on the camera: Software Version: 2.103, Build:2012-7-24

I emailed my vendor about the problem and she emailed back an update to my current firmware. Thankfully it work without any issues as of yet. Thanks for all the help and comments made my life a lot easier mechBgon, Buellwinkle, MaxIcon and MR2 If anybody wants the firmware build 23-03-2013 for PAL let me know.

I watch the lights and its pretty similar to what you described. I took off the cover for the camera and watch the led inside the camera. It turns on green, grand it's working for a minute then it stops working, the light stays green goes red and reboots turning back to green. So from that it's freezing and rebooting. Is there anything I can do to fix it?

Hey buellewinkle, Enjoy reading your website. I only have one poe and ip camera at my disposal, (D-Link 8-Port PoE Gigabit Desktop Switch brand new) I will try switching cables to see if that's the problem. I'm hoping the solution is a reset, as I bought the camera from aliexpress It did have the wrong default gateway for my router and I changed that in hope of a fix, but no joy.

I got an old analog camera and was wonder how to power it, the cable has been snipped. Inside this cable are three wires: Two of the wires are thin, one is black and the other is red. Inside of both of these is two very thin copper wires (power ?) The third cable is black and is thicker and inside is a white wire surrounded by copper wire (coax cable data?)

Thank you for your answer, what would the thicker black cable be then?