Hi, newbie here. I am a system integrator for CCTV systems in Singapore. Recently, my company bought some China-Made IR cameras fitted with fixed focal length lens (6mm, 8mm, 12mm, 16mm) All the cameras are the same except for different lens and have 30 in-built IR LEDs.
The cameras are meant to be installed in a warehouse.
After installation, the cameras worked fine during the day time. However at night time, only cameras with the 12mm and 16mm lens worked. The images are abit snowy with noise but still visible.
But the rest of areas covered by the cameras with 6 and 8mm lens are completely dark.
I have gone down to return the faulty cameras (with 6and 8mm lens) to the supplier but was rejected. The faulty cameras were tested working fine in IR mode at their office. The test was conducted at their office walkway (the walkway was in an industrial building, enclosed area)
I was told tat the area in the warehouse was too wide to be covered by the onboard camera IR LEDs.....
The supplier was suggesting me to get an external illuminator with a wider angle of proj to solve the prob. (WTF it will increase my project costs)
I hope to seek professional advise on what angle of IR projection should i use for 6mm and 8mm fixed focal lens.
There is a wide range of extreme CCTV external illuminator. Not sure which is more appropriate.
