I was asked by my employer to relocate the G.E.security Tvc- bir-hr camera to another area in our building. I was not the original installer, and as the situation is, I had to cut the cable on the back of the camera to remove it because I could not get the original connections out through the block wall (small holes drilled on the inside and out) where the camera was mounted. I had removed power and disconnected from the dvr first so the camera should be in good working order. I was hoping the cable was a Siamese type with power conductors sleeved with a coax. Unfortunately, what I am seeing inside the cable jacket is 2 insulated wires one with an outer conductor with a white insulated conductor in the middle and another that has the same type of uninsulated wire with a red insulated conductor. I have also found out this unit is discontinued and tried contacting Interlogix who makes these units, but does not support end users. From pictures on data sheets it appears as the original ends were female rca type plugs and I was hoping someone may able to help me determine if which conductor is power and polarity and which should be the video cable. Thank you in advance
