khan888

Plugged one camera directly into the psu and still the same issue, noticed the other camera is fine it's been installed in darkness hence why i cant hardly see anything....how would i get round this would installing a floodlight help? Tried other cameras from the same psu and working fine.

The psu is working fine, ive tested the voltage on the IR power board and getting 12v. Its strange these two cameras were purchased seperate from the dvr system and they are the two thats causing a problem

Hi, i've installed a swan 4 camera dvr system but two camera's don't seem to be working at night...they are fine during the day. The infrared do not light up but when I hold up a digital camera to the bullet cam the infrared is on but very weak. Anyone have any ideas? Thanks

Thanks for your help, i'll give that a try tomorrow and report back. Cheers

I've forwarded ports 80 and 0808 but when i test ports via certain sites it says ports blocked!? In my web browser i input 192.168.0.15:0808 and i have tried 192.168.0.15:80 should the ip address be the external address?

Has anyone got any idea? Thanks

More Attached

Managed to add some pages of the network setup from the manual

Can you pm your email and ill get it sent over to you?Thanks worth a try im sure you know a little more then me

I know no support for their own product....not good I have the manual but it's too big to upload, Would it be possible if I can email it you?

Thanks aibudo, doesn't give me a model number but it's a sumvision Hawkeye H.264 DVR BUILT-IN 7”LCD SECURITY SYSTEM +4 CCD Sony CAMERA Cheers

Thanks for your replies. Yes over LAN network everything works ok I just want to view the cameras if I'm at work remotely. I've setup port forwarding but for some reason my router/modem doesn't open up the port! I've found my external IP address just struggling to get connected. My settings on the dvr are as follows: Type: static ip Port: 00080 Web port: 08080 IP address: 192.168.0.15 Netmask: 255.255.255.000 Gateway: 192.168.0.1 DNS server: (not sure what this should be) It's a sumvision h.264 dvr. Thanks

Hi, I've installed a 4 camera system into my home problem is I cannot view the cameras locally via the software provided and also would like to setup remote viewing. I've cant attach the DVR user manual and software manual, but if anyone could guide me that would be brilliant. Thanks