Boogieman

I believe ivms requires port 8000 to be forwarded as well...actually it doesnt even need the http port...check the manual for the "media port" it should be 8000 by default...

You didnt say how you fixed the damaged cable...regardless you issue is most likely related to a using a coupler or even the jelly...when working at the fringes of specs you need a single run cable...and as others have mentioned preferably cat6. Also ensure the cable you are using is solid copper not CCA or copper clad aluminum.

that will work. another option is the hikvision 2032..both are good cameras. If you are willing to order from china you can save a good chunk of change..make sure to specify 3.6mm lens and english firmware. You wont be able to return and no warranty but its 40 dollars less. http://www.aliexpress.com/store/product/Free-shipping-2014-Original-Dahua-IPC-HFW4300S-infrared-1080P-gun-waterproof-network-camera-3MP-IR-ip/638300_1593622284.html http://www.aliexpress.com/store/product/2013-Hikvision-Original-infrared-gun-waterproof-network-camera-DS-2CD2032-I-3MP-IR-ip-camera-support/638300_1397052584.html 4mm lens and english firmware on hikvision..

Some hikvision cameras have line crossing detection (this is on ip cameras)...you can add pir motion sensors to some cameras as well.

192.168.1.10 is your local ip..you need to use the other external ip address...you need to read up on port forwarding....What ports did you forward? you need to forward the correct ports...

look at hikvision and dahau...both have low power consumption.. http://www.dahuasecurity.com/products/ipc-hdw4300c-620.html 4.5w vs 6.2 on the trendnet...

Have you tried via IE... are you sure you are using the proper credentials? user name may be case sensitive make sure you didnt add any spaces..

Looks like a good system. They even use a wd purple drive...q-see generally rebrands dahua which are good cameras. Its from costco so if you ever have an issue its easy to return. You will not find better pricing with that kind of return policy and warranty.

I am still unclear...are you having this issue while you are on the same network as the dvr? or from an external network? First you say you are your local network then you start talking about port forwarding so which one is it?

Local speed does not depend in internet...you can disconnect the internet and it will still work..

So you cannot log in remotely? What ports did you forward? are you using the correct external ip address?

I like this idea. I will look at vari focal cameras for this set up for sure. Add cameras as he can afford it is good too, he is a cash and carry kind of guy. Cables: I got a deal recently on 1000 foot spools of Beldon rg6 and rg6 quad. I bought them at $25.00 per spool from a supplier that is going out of business. This cable was a really nice upgrade for my own lower end home system. I plan on using a central power supply box with 18/2 wire for power. The spaghetti string cables that come with these "kits" are just useless in my humble opinion. The shortest run will be about 60 ft. and the longest will be just over 100 ft. Thanks for the advice. jag You cannot use that cable with HD cameras unless you are going to use sdi or something like that which should not be used in a new install. Run ethernet and use something like hikvision 2732 that has an sd card if you dont want to invest in an NVR.

Lots of reading to do... You dont want a cheap analog system that give you 8 cams and a dvr for 200. You want an ip system. Run ethernet to all cams..use power over ethernet - single wire to each cam. You dont even need a pc. Just use an NVR. A system like this http://www.costco.com/Q-See-8-Channel-HD-NVR-Security-System-with-2TB-HDD-and-6-1080p-Cameras.product.100128993.html You can choose to buy cameras and use a pc for nvr. You will need to buy a poe switch. And software, which can get expensive depending on what you use (some charge 50 dollars per cam or more)...Do not build your own. You can buy a business refurbished pc with the same processor as in your original post for 300 with a next business day warranty. You cannot even buy the processor and OS for that money. But honestly for a novice like you, get a prepackaged system...

You are joking right? that is a 40 dollar analog camera its junk....thats too expensive? Look at the hikvision 2032 4mm camera..you can get it for 85-150 depending on where you buy it from. Look at a aliexpress. Please do more reading before you even build a pc or buy a single camera.

You can use those cams with hikvisions vms for free. Or use a hikvision 64 cam nvr or two 32's...

Sit this guy down and tell him what an idiot he is. He is loosing $3000 annually (and thats the money he knows about) but only wishes to allocate 1k for security....that makes a lot of sense... You are not getting a good ptz for 150...get a varifical camera so you can adjust the zoom during installation.

Dont use a discreet graphics card, it adds heat and consumes extra power and is no benefit in an NVR.... As far as software that will depend on the cameras you intended to use...what brand/model how many? First you gotta choose your cams then build the NVR around them.

Yes, because if the person lives in your unit they dont want to get blamed when you beat the crap out of him/her. Most places have a policy where they will not provide it absent a subpoena or police request.

No children died in that video....it is funny when terrorists die..with respect to Sir Flannel's comment, there is not way those guys were trying to remove anything...that is not how its done.

Well... The 2CD3132 is not a PTZ camera, so do not expect it to move much, no matter how hard you click on the arrows. You might want to take the camera (with your hands), and point it wherever you want it to look at. These posts are cute...pop up on various forums every once in a while...

RG59 Or u can use Solid Copper Cat5 or 6 with baluns which will be useful if you ever decide to upgrade to ip cameras so you dont have to rerun cable.... http://www.monoprice.com/Product?c_id=110&cp_id=11011&cs_id=1101101&p_id=6878&seq=1&format=2

what ports does the manual say you need to forward? have your properly forwarded them?

Try different wifi channels...try different router...look into powerline adapters or if you want to solve your issue, hire someone to run cable...the pros can do it no problem...about 100-150 per run, all your problems will be solved and you can use better cameras than you have now. What brand cameras do you have?

Wifi=problems...run cable to the camera....you can try changing the wifi channel on your router use wifi analyzer mobile app to check what channel has least interference.

You have a good NVR and you are using a bottom barrel junk camera? You are lucky that the video comes through....in general if you want 100% compatibility get cameras from the same manufacturer as the NVR.