chindley

Hi, All. I have a Sanyo VDC-DP9585P THis is avandal resistant dome camera with PTZ. I was using it fine with RS485 runnig off my DVR card untill I moved house and tried to reinstall it. For the life of me I can not remember what coloured wires powered the PTZ function. I have the manual but it does not mention the wiring details. does anyone out there have an insight into these models who can advise me please.

Hi all. Im after some info on wiring a Sanyo camera. I cant seem to see a model number on the unit but it looks similar to this model VDC-DP9584NH Waht I need to know is which wires drive the PTZ function. There are red and Black which are power, there is a sticker which says yellow- day/night --purple -alarm in1 -- orange - alarm in 2 -- blue - alarm out. grey- common. but it does'nt mention PTZ . The annoying thing is i had the unit up and working for 12 months before moving house but i'm beggered if i can remeber how i connected the PTZ to the controller any help would be appreciated [/img]

I am after a VAC-70 setup module either to buy or to hire, AS I only need it for a day or so, i dont want to pay to much, Is their anyone out there who has one I could Hire for a day or so. Cheers

Does anyone know where I can get a free (if possible) virtual keyboard to control my Camera, it uses PELCO D protocol and want to control it through the com port of my PC, the one I have at the moment will only control PELCO spectra. any help would be appreciated.