cam080

Hi all, Does anyone have any experience in setting up the DS-7732 NVR (or similar) with the iVMS-4500 mobile application? I have tried to set this up and i find that it will only display one camera even though there are 5 cameras connected. There is an option in the iVMS-4500 app under device information that allows you to set a camera number, but this is always set as 1 and unable to be edited (greyed out), not sure if this is the problem? iVMS-4500 works with multiple cameras if i input each cameras IP address individually when using my home network on WiFi but when using the NVR IP address it only displays one camera. Can anyone offer any advise that has worked on the iVMS-4500 app? TIA

Firefox/IE problem sorted! But still have the issue of the 5 identical cameras being shown when connecting via 3/4G, ill keep playing around to see what i can find, but im not all that familiar with IPcams, this is the first lot i have setup, so its a bit new to me..

Well that kind of worked.... I set the ports to what you suggested and it will now display the 5 different cameras when im connected via WiFi but as soon as i switch to the 3G/4G network and try to connect using the DDNS service (dynDNS) it displays 5 cameras but its all the same camera? any ideas what could cause that? I had to modify my router config to enable port forwarding of port 9000. Also another thing i have found, as i have changed the HTTP port to port 90 i can no longer open the NVR in IE or Firefox, if i change it back to 80, i can open it again. I think im getting somewhere, it just needs a little more work to be perfect

Yes you're correct, 32ch, external PoE provided by lan switch. Ill give that a go when i get home and see what i can find. When i'm at home on WiFi and enter the IP address directly of each camera it works fine, but when connecting remotely over mobile via a DDNS service that's when the problem occurs. I'll update this with what i find when i get home, cheers for the help!