Hi people,
I installed in my home a CCTV. The Hardware 'pack' that i bought is:
- 4 Cameras 700TVL SONY CCD Outdoor;
- 1 DVR FLOUREON 8CH HDMI Full D1 with 1TB Hard Disk;
Image of the Pack: http://img1.imagilive.com/1213/1f54.JPG
Specification of DVR: http://img1.imagilive.com/1213/DVR.JPG
Specification of CAMERAS: http://img1.imagilive.com/1213/camera.JPG
I have installed everything and its all working very well.
To I can see the 4 cameras (In miniature) in the TV of my room, I bought a 30 meters (100 Feet) BNC to RCA Male to Male Cable ( http://img1.imagilive.com/1213/1b60.JPG ) and i connect BNC output in my DVR to the RCA output in my TV and this works, the image with the 4 cameras appear in my Room.
The PROBLEM is that the image blink a lot of times! Starts working but after 20 seconds...Blink 5 in 5 seconds for a minute...And Stop Blinking...After a minute blink 30 seconds in 30 seconds.
What can be wrong here?
Thanks in advance for the helping.
Cheers and Merry Christmas!
