nicowizz

****, I have again reboot with flag 0x01

Hi, I have had fan for netbook, dvr is cold , i haven't new reboot. Not good model dvr dahua, no fan for motherboard !

Hi, (Sorry for my english) I tried 3 DVR HDCVI Dahua 4104, everything works ok every time some days, and then I increasingly abnormal reboot (Flag 0x01), every day Power supply -> swap with 2A or 5A => again Flag 0x01 HDD , Seagate, ou WD => again 3 different DVR 4104 => again I unplugged 1 camera by 1 Camera => again I have open case for temperature (21°C) => again UPS PC => again I have replace by DVR HDCVI no name chinesse => OK not reboot WTF !? You know problem ? or have you idee ? Thank you Nicolas exemple : Time: 2016-01-22 06:49:29 Type: ALLUMER Contents: SYMBOLE RÉINITIALIZÉ: 0x01 Reboot Type: Abnormal Reboot Device Model: DHI-HCVR4104HS-S2 System Version: 3.200.0001.20, Build Date: 20-05-2015

Yes ! It's my phone 3g operator block 554 port ! It's ok with other port. thx

Hi, I just bought a camera Dahua IPC-HD2200c. Hi, When I connect the camera with Smartpss, web navigator with my phone, picture jerk , stop 1/5 sec every 5 secondes, with 1080p or 720p mode, 20fps or 25 fps The problem is with direct connection camera, but the camera with NVR not problem. With a Hikivsion camera I haven't this problem. Software Version2.212.0000.4.R, build : 2014-03-07 WEB Version3.2.1.173927 Thank you for your help. sorry for my english Nicolas

hello, I have a problem with Hikvision NVR build 131018 V2.3.4, iVMS works very well with the local wifi. But with external 3G network, I get this error message "No more users can access to the device". Port forwarding is ok, I tried with NAT auto, everything is OK. When I call the camera directly, it works. Or with another DVR (dahua) that's OK. I do not have a question or problem with port forwarding, but I have a real problem with this NVR and this message "No more users can access to the device". I have the message only for live, the replay works ! Thank you for your help, I lost over 4 hours sorry for my english Nicolas

it is good, it should decrease the sharpness and increase DLR.

All my cameras effio-a make me defects as pictured

Hi, Heck, I ordered 10 cameras Effio-a thinking that it was better for a few more expensive than Effio-E dollars. Thank you for the information, now I command the Effio-E Nicolas

Hello, Have you tried the new chipset Effio-A ? I'm a little disappointed, I have defaults when the brightness is low. I see tiny lines. The video management seems worse than the Effio-E. I await your opinion... Thx Nicolas

Hello, I have found two different suppliers, 1 offers camera with Effio 4140+673 and a other ICX811AK. what is the best? Thank you Nicolas

Hi, I am French sorry for my english. Thanks for everything, F12 was my solution for my Chinese DVR !!