LUCKYARIES

Further to this problem,I by passed the 100 ft video cable and hooked the power adopter to the camera ,that solved the problem.So it looks like the 100 ft wire cant properly transfer all the power needed to operate the camera at night thanks all

Thanks for the reply.yesterday I bought a 5amp power adopter and no difference, I may have to try and hook up 3amp power adopter directly to the camera and lenghten the power cord a few feet and not use a 100 ft power line .

thanks for your reply the power supply by the dvr is 12vdc and 1.2 amps cable is 1/8 thick and 100 feet long hope this helps thank You

thee is a power supply by the dvr its 12v and 1.2 amps thickness about 1/8 thick

Thanks for your reply the is a power supply by the dvr its 12o v , 12vdc and 1.2 amps thickness about 1/8 inch and 100 feet long

here is a link and its powered from my dvr cable is a 110 ft outside cable http://www.ebay.ca/itm/CCTV-650TV-Line-26x-PTZ-Dome-Camera-Outdoor-Day-Night-Heater-Fan-Wiper-H-Speed-/151066578174?pt=AU_Business_Industrial_Safety_Security2&hash=item232c450cfe&_uhb=1 hope this helps,thanks

they are both 100 footers ,manufacture also told me to disconnect the video cable at night and reconnect it in morn ,but no diference and not sur on the gauge but looks the same as my other cameras (NOT PTZ)

Thanks for your reply it has a video and power cables connected to my dvr, I use a 100 ft outside cable, During daytime when ir are OFF it pans tilts etc resolution is perfect At night when the Ir comes on resolution is broken in small little squares ,there is NO pan tilt or power No it is not behind a window ,thus behind a widow would give you power to rotate the camera and the image would be blurry.In this case no movement control at night but you can can see an image with low low resolution, yes I believe the IR is using up the power suppply,hope this helps thanks

Both internet and locally over flat screen,as soon as Ir comes on resolution broken up in whitish haze

Dome camera

this is a cctv 650 tvline dome with Ir Im told I need heavier wire by the seller ,not sure about that,not analog

Hi all hope someone can help me I have a 7 inch ptz camera,works fine during day,does what it needs to do tilts,pans etc. resolution good. However come night time resolution is very poor,broken and does NOT tilt ,pan etc. very strange Im using a 100 ft 1/4 cable thanks in advance