uprighttech

Thanks for the recommendations! Good point about low light vs no light. There is probably only scant moonlight when nobody is there at night, but I can check with the client to see if there would be any issue with leaving some lights on. The first cam is probably a bit expensive for this client, but the second looks pretty nice. I don't think the client would have a problem cleaning for spiders and such periodically so long as they are aware that it needs to be done. I think I would prefer to have something with IR, and we can deal with the trade-offs that come with it. Located in Western Kentucky, USA. Where is a good place to get these Dahua cameras? Any other recommendations for a camera with IR that's under the $1000 mark?

I was pointed to these forums by a trusted member at another forum I frequent. Looks like the place to get the info I'm after. I need a recommendation for a weatherproof PTZ IP camera that will work well in low light. This camera will be going into a barn so the client can view their sheep during lambing. It will not be used with a DVR box, so it needs to be an IP cam. They need to be able to view it locally from the house and from other locations using a PC or smartphone. It can be wired or wireless as we have a wireless bridge to the barn. There is power nearby so it can be PoE or use a power adapter. No recording capabilities are required, but the ability to record to a PC or a CF card on the camera if needed might be a nice bonus. Night-vision needs to be good for at least 10m. The client is willing to spend some decent money for a camera that will meet their needs (I'd say up to $1000). It saves them a lot of time and the hassle going out to check on the animals in the middle of the night in the cold and weather. I am also willing to recommend multiple bullet cams to the client if someone has a strong recommendation in that direction, but the PTZ setup was working well for what they need right now. I had a Foscam FI9821W there, but I severely underestimated the harsh environment of the barn. I took the camera out yesterday and it was completely covered in all manner of dust, dirt, bugs, spiderwebs and who knows what else. It was just constantly restarting itself. Only made it through one season. After reading around here a bit, I see that using Foscam was probably a mistake to begin with. I've looked around at some models from various manufacturers, but I would prefer to get a good recommendation from someone who has set up a camera with a similar environment and requirements. They are supposed to start lambing this weekend, so I'm looking to jump on something very quickly. Thanks!