Hi Guys
I recently removed my existing Swann CCTV Camera as we were having aluminium cladding attached to the outside of our building.
I took the opportunity to upgrade to a Swann Pro 760 Wide Lens Camera, I used the existing cables and it is plugged into the same channel on the DVR as the 'original' camera was; but the picture quality is beyond poor, there are waves run horizontally down the screen and the top edge sometime fuzzes out.
This camera comes with 3 cable in one bundle (Power, Picture and what I think is a control wire for a remote that I have not connected)
I have the same type of camera installed inside the my warehouse as well without any problems (The wired controller is not wired up to this either)
Could the aluminium cladding be interfering in any way.
