beginner0

yea, i thought about that kind of answer, but at this point i just want to try on myself what is it wifi video in work and all problems which are connected with that video. So can you advice which manufacturer i can try for transmitter and receiver and can i try >=3wat tx and rx modules ?

my goal is try to use wifi video cameras (there will be more than 30 cams) here is two floors, each floor has from 100 to 200 meters long and very much walls. i already tried one wifi camera with receiver and sender 2wat. When there is receiver and transmitter on same floor and and distance is (including walls) 30 meters = there is good signal , but when receiver is on 2.floor and transmitter is on 1.floor - then there is a problem (very bad video signal), one word said no signal. so my question is, what you can suggest ? maybe on each floor i can setup some wifi cameras and wifi amplifiers ? (i mean device which can work like wifi repeater) AND on each floor i can setup 16 channel dvr, so next i can connect 1.floor dvr with 2.floor dvr ? thanks

I have comart usb cap 100, genuine software from comart wont work on old pc, for 2 days i tried dozens of sofware (like web cam software) and so .... But in all 3rd party softwares i can't setup resolution much than 320x160, so in all 3rd party software my cam works but quality of recording is bad. Maybe some one knows good 3rd part software for usb cap 100 thank you !

Hello, I have geovision software 6.0.0 and pc based dvr board vki-3.01 i'am using vki boards about a year and this problem occured for the first time. on the pc (where is dvr board) all is fine, video is recorded, video archive also is normally viewable. BUT ! when i try to view video archive trough lan or internet (from any pc in the internet) then all video shows very fast ! i mean i try to view video archive trough remote play back. Also when i download any video from remote play back program, this video shows very fast too. I reinstalled codecs (klite codec pack), i reinstalled geovision software. Nothing helps Can somebody help ?

software is geovision 6.1.0.0 dvr card: pc based vki-600 my goal is to use multicam on monitor 1 and do my work on monitor 2 using dmpos.exe multicam software is running on monitor 1 and all cameras are displayed correctly, but when i try to open multicam on fullscreen then multicam sofware go away from monitor 1 and on monitor 2 i see Black clean fullscreen. question: why i cannot make fullscreen on monitor 1 ?

problem is that after uprage from 8.0 to 8.2 all video cams bacome blacked. On the version 8.0 all works fine but haotically i get error Microsoft virusal c++ runtime error runtime error! program c:\gv600\gv600.exe this application has requested the runtime to terminate it in an unusual way. Please contact the applications support team for more information. my system is xp pro sp2, intel based pc, dvr card vki600L - http://www.loks.lv now my goal is to upgrade my geovision 8.0 to geovision 8.1, i downloaded geovision system 8.1 and drivers. but people ! please tell me, how to correctly upgrade from 8.0 to 8.1, after upgrade i will have video blakced or not ??? thanks.