Noon

Hi there, I have an employee and would like him to have access to main system under his own account on windows xp. Can I do that without having to exit main system under my account?

Ok here's an update! As for Center v2 it worked and I don't know how! I opened additional ports for it (ports 5546-5549 were forwarded already but added 3550-6550) and connected to centerv2 while the system was not monitoring, so one of these two things did it I'll experiment later and let you know which one. As for the additional user, what I'm trying to do is to have the user log to geosystem from the same computer but under his own win xp account for some privacy concerns. This one is giving me some trouble because the system is already running under my account on xp and it fails to load upon switching users. I tried to exit system and log in to xp under the user account after even logging off as admin from xp but didn't work either ( a message:" faild to do a registery entry "appears and geocenter exits) I tried it with giving the user a limited account and with giving him an admin account,which I do not intend to do but just did it for sake of trying,with no luck. I also treid running Geovision as a service and disabled the startup, the service loads fine but same results for user account. This is my story for now, what do yo suggest?

As CCTVINSTALLER suggested it seems like LAN is the only way to go. Tried to play with installing Geovision as a service and other things with no luck. I'm going to try a center over LAN See if this will solve it. I have another question; can Geocenter v2 be installed for internet connection or is it limited to intranet? I have connected to center remotley with no problem but, Geocenter v2 is not going through.Any suggestion? Your help is appreciated.

That's part of the problem Thomas. I tried to use switching users but, Geovision will auto load and the error message appears.

check this you may find what you are looking for. http://www.cctvforum.com/viewtopic.php?t=692&highlight=

Hi there, I'm new to this dvr stuff and I have a question. I'm putting together a 16 cam system using Geovision 800. I did not install the cameras yet and wanted to test the system. The geovision keeps restarting by istself every 3 minutes or so. Is this because the cameras are not connected yet? or is it a different problem that I need to solve before connecting the cameras? Any one who knows your input is appreciated!. The computer specs: P4 HT 2.8GHZ 512 memory 20GB HD1 250GB HD2 intel motherboard Nividia Fx 5200 128mb Geovision v 6.05 upgraded latest Bios and chipset

Hi there, Is a 12vdc regulated 500mA power supply ok for a 12vdc camera 150mA? Is the voltage what matters or the is it both?

Rory, they have a lot of other things that I might need also, a little pricey on certain things though. But hey the got the stuff . Thanks again.

Thanks a lot for your inputs. You have been of great help.

I have 16 cameras.

rory is it high enough to damage the camera? and do you know where to get a multiple output power supply with these specs.?

Thanks a lot DVR_Expert_Australia and Steve. I'm glad I asked you guys. I let you know how everything turns out after I install the cameras.

Thank you teve6690 for the reply. I did what you suggested and unchecked all cameras. The restart still persists. Does this mean that you have to connect at least a camera in order for the restart not to occure? Or is it something else? I didn't get the cameras yet and wanted to make sure the pc is holding ok before complete system installation.