Bara63

Hi, All I bought this Zmodo standalone 16 ch DVR to replace an older 8 ch on from a US based CO. The problem I am having is. I can,t get it to streem over the network or internet, I fowarded the ports to my Router. I can see the screen divisions on my computer but no video. Help anyone?? Thanks

Hi all, after uninstalling my system software GV800V2 16CH from my DVR, I re installed using a guide on the internet, the dvr runs and records however i get a message on screen every few seconds "NO NEW ENTRIES WILL BE ADDED TO SYSTEM LOG IT THE CAPACITY OF THE SYSTEM LOG IS LOWER THAN THE REQUIREMENT." The system is showing 116.28 GB. How can I resolve this? Thanks

Hi, Thanks for your reply, yes, The 485 tx+ tx- is going to the cam from the dvr, I tried it with the pelco keyboard and it works fine , I tried pelco as U recommended,but I was told that pelco only providsupport for their products. Thanks again for uour help

Hi all, I am new to Dvrs, I bought this dvr card on e bay, has been working fine but i can't seem to get the ptz function to work with my pelco spectra 3se dome, the spectra works fine tried it with a Kbd 300. everytime i attempt to move camera the specific camera's vido jumps but the camera doesn't move. http://cgi.ebay.com/8-CHANNEL-DVR-CARD-240-FPS-CCTV-16-CH-VIDEO-RECORDER_W0QQitemZ260071017325QQihZ016QQcategoryZ116224QQrdZ1QQcmdZViewItem This is how I am set up. Pelco Spectra 111 SE, Version 1.25.0016 Bud rate 4800, Address D=1, Address P=2 Ptz decoder- port3, Using USB to RS232 converter/rs232 to rs485 Ptz converter PTZ Decoder / Pelco-p-d or D Bud Rate 4800/ Data 8, Parity none, Stop Bit 1 Dome Control- Protocol: Pd/d, Com 3, Address Id 1 Camera Camera #1, Capton :Cam 1, Attach ptz Id :3 thanks