Jump to content

RichBlibit

Members
  • Content Count

    2
  • Joined

  • Last visited

Everything posted by RichBlibit

  1. Every time I put an RJ-45 connector on I screw-up and reverse the wires - never fails - I can be staring right at it and like (bad) magic they get reversed (so don't ever ask ME to help with wires). My taped up drawing says Data is 1,2,3 & 6 and power is 4, 5, 7 & - I always thought the power was shared over the clock pair so you could do it with 4 wires, but, but not in the POE units we use here - on these, the power is on second two pairs - but I did discover that even if you get the correct pairs, but get them backwards (reverse the wires in that double pair for power - (solid for striped and vice versa), IT STILL WORKS! At least you get power - I discovered that this is because the camera end uses a diode bridge so the (+) and (-) always get corrected on the camera end - so you may have power even if you got them reversed, but if you got the clock and data reversed you WON'T have any data (if this makes sense -I may be saying it wrong). But what I mean is, you can have power, but still have the other wires reversed or incorrect in some fashion. But, I'm guessing you are FAR better at getting the wires in the correct place before you crimp (Like I said - I NEVER seem to!) If the cam is in reach, a bench test it all I can imagine you can do. But usually, the camera is at the top of a 30 foot peg-less pole ... or not easy to get to. That's the story of MY life, lately [grin]. Good luck. Rich
  2. RichBlibit

    Hi, and thanks for the forum!

    HI all, We maintain several multi-camera systems in leased garage (repair type garages) and connected office spaces. The systems are relatively inexpensive KGuard sha-104 and 108 system, but they seem to work quite well. Several cams are remote wireless with custom 2.4 Ghz one-way links (no PTZ control or audio), and some of the cams are 700 line rez (not true HD, but they look great and record very well) - some have 100 foot IR night lighting (large clusters of IR LEDS) that work pretty good - in fact, better than I thought they would. We have some false motion-detection issues (spider webs and some type of bugs start recording and alarms sometimes (this is FLorida - land of the Palmetto Bugs - kind of like Mutant Roaches the size of Volkwagon Beetles) - but we're getting it figured out (mostly trial and error). They had a company put most of the systems in and they went under and disappeared (not sure why, but we are kind of "in the sticks" if you know what I mean, so that may be it), anyway - building maintenance picked up video maintenance. Probably better off for now. So a BIG THANKS for the VERY USEFUL forum! We appreciate it a whole bunch. There is lots of good info here, and we will try to help where and when we can, but mostly we are takers (learning) right now, but we will get more proficient as time goes by (we hope) and help as we can to pay back the help/info we get. We do electronic maintenance on some items (radios and some other coms-related stuff - microwave, wireless networks with bridge and access points, etc.) here and we have a shop with a tech who has a well stocked electronics bench with meters, generators, power supplies, o-scopes, spectrum analyzers, radio tech gear, and some more sophisticated stuff (whatever it is) - for who knows what else all they work on. Anyway - THANKS AGAIN! WE REALLY DO APPRECIATE THE FORUM! (can't say that too often ) Regards, Rich
×