latropa

I just bought two of these cameras and just started playing with them and one thing I haven't been able to figure out is how to get it to change the filenames for the different cameras when I capture an image or video from the web interface. I've set them up so each router has it's own static IP on my network and then I port forward a diferent port to the local port 80 on each IP and can now access them both through my routers DDNS service. The captured filenames all look like this though: Those are from two different cameras and I thought they would have a different number besides 01 after my domain name because I did go to the Configuration > System > Device Information and set a device name and different device number for each camera (1 and 2). It uses 01 for both cameras though. How do I fix that?

There doesn't seem to be anyway to do it. I can just go in and delete all the fields and save it, but then it gives me an error and everything you had in there eventually shows back up.

I think this is right , and if you can any promblem in firmware , you can contact with me .or send Email fydym@126.com. I got it to work. Unchecking the box has no effect if the red IR lights are already on, but if you uncheck before the camera goes into night mode, then they never turn on when it finally does.

Is this how you are suppose to do it with the new firmare? Because I uncheck the "Enable IR Light", save it and the camera still has the red lights on.

Resource Monitor It comes with Windows 7 and 8.

Is it off by an hour? If so, it probably didn't get Daylight Saving Time right, you have to go the DST tab under Advanced Configuration > System > DST and set that up correctly for your region.