iTuneDVR

У меня просто софт основной написан под винду, потому и делаю в винде без проблем! А вот может ли он - не знаю

Олег! Ну куда там американцу русский язык?

buellwinkle! All in your hands!

Some correction! TFTP use 69 port UDP Some router block it. And of couse you need to use only 1 LAN adatper in the PC

Dirk_D! Share your IPC. 23,80,37777 ports I'll see

It's not Russian it's Bulgarian! Russian I have long been in 5.2.5, and besides, the correct translation, not the standard that is! Only sense from the language selection, if the camera is still Chinese and day of the week in Chinese! In addition, it is not visible 5.2.5 or 5.1.0 multilanguage ???

Ok! Share 23,80 & media port

Ok!

How you try adjust time? Share your dvr. Let's see remotely!

So! 2015-02-12 00:00 - 00:59 try 404262

Let's try tomorrow. You need correct date & time (hour) om your dvr (better screenshot)!!! Possible, password time (hour) limited!

That is the current date&time on your dvr? Better full screenshot winth login menu!

It is possible that problems may arise after updating! On how old you are looking for?

Of couse you can! As you wish! But the effects can be different!

It looks fairly similar doesn't it, thats what I thought, it even uses a similar motherboard naming format Do not despair! Or get the firmware from this registrar or look TTL adapter and need to connect to the DVR and watch it download logs and intercept control!

I think it is quite different since understand the situation from the inside, open firmware and did custom 5.2.5 firmware. For Chinese IPC, the Chinese need the firmware 5.2.5, for the European IPC need European firmware 5.2.5 firmware. Now from the manufacturer, comes another, changing the boot loader in the IPC and controls the TFTP recovery and no longer flash firmware 5.2.5 below

You already have General_IPC-HX5(4)XXX_Eng_P_Stream3_V2.420.0005.0.R.20141205.bin Why you need upgrade?

I think you have the latest! General_IPC-HX5(4)XXX_Eng_P_Stream3_V2.420.0005.0.R.20141205.bin

Your need open your IPC and connect TTL2RS232 adapter to it and your PC!

I am a novice, It's dahua, not hikvision

I see this for the first time, though it reminded me slightly XM tuned. But it's not! Is there a link to the firmware to this DVR?

help please Where the gurus on this board??? Help this man with the Chinese DVR!!!

It was DVR5x00_B platform and firmware General_HCVR5104H_Eng_P_V3.200.0005.1.R.20140427.bin without any problem upgrade this DVR. All done!