iTuneDVR

Recompile firmware and so on Some screenshot's from another forum. IPC DS-2CD3410FD-IW. Browser IE8. http://www.hikvision.msk.ru/forum/4-2844-14248-16-1413112678

Your change SetLBS on your IPC? What is your OS & browser? Try add your IPC at EZVIZ manual with entering code ABCDEF

The same on Russian too

CBX! Firmware is also suitable for other models. Too bad that the certificate was not renewed and V1 to V3

Your puncture, definitely!

Then open IPC and test it.

PC IP = 192.0.0.128 & firewall is down & 21 port on PC is free IPC IP = 192.0.0.64 Then power is on, IPC try to access 21 port to IP 192.0.0.128 several second, if not then load firmware. If you have no problem with it, your TFTP recover will success. If you have hardware problem then open your IPC and check it!!!

Boot loader in any case not overwritten, so do not fool all of the head and quietly restores using TFTP. I have the same camera, I did it many times. Recover always works automatically !!! Perhaps you have a different problem, what are you silent probably !!!

Dahua IPC-HDW2100S: webplugin.pkg viewtopic.php?f=19&t=42974

I'm glad

Try this http://www.iTuneDVR.ru/_ftp/DAHUA/ipc4xxx_webplugin.pkg

Yes it's from IPC8XXX, but it must be work anyway!!!

Try this http://www.iTuneDVR.ru/_ftp/DAHUA/ipc8xxx_webplugin.pkg

Make login screenshot with current date!

In my photo gallery http://www.vk.com/iTuneDVR i posted something and Dahua and hikvizhen. Check if you have time;) I have long been a lot of successful implementations. Everything is possible! For ex:

In the Chinese IPC series DS-2CD3XX0 is selected dev.ys7.com, and in the European dev.ezviz7.com. I saw this in the code davinci. Firmware 5.2.0 is multilanguage and for a series of IPC is quite different than the raptor 2XX2 or 3XX2. A patch for this series and other Chinese equipment variants DS-2CD1XXX DS-2CD2XX0, has already been made and already rebuilt custom firmware. The only thing that confuses me a little, so a processor of the IPC HI3518 !!!

In the Chinese IPC version is selected dev.ys7.com, and in the European dev.ezviz7.com. I saw this in the code davinci. Firmware 5.2.0 is multilanguage and for a series of IPC is quite different than the raptor 2XX2 or 3XX2. A patch for this series and other Chinese equipment variants DS-2CD1XXX DS-2CD2XX0, has already been made and already rebuilt custom firmware. These firmware 5.2.0 - Multilanguage. The only thing that confuses me a little, so a processor of the IPC HI3518 !!!

Before rebooting setLBS dev.ezviz7.com:8555 : ENTER It's work???

Yet I have not seen Dahua DVR, NVR that would not be to flash instead of the Chinese language into any other course if there is an appropriate resource. I did English, German, Russian. All solved and nothing complicated about it. What your DVR firmware version? About how many DVR you talking about?

CBX! Agree. However, the most likely vulnerability exists another kind. I think this may be the CGI API, PSIA API, which is used and Dahua and Hikvision.

For date 2000-01-19 password must be 000000 But..... If you know DVR IP adress, share it to internet. Remote full access i'll see.

To begin with, in any case you have to disassemble the IPC Adapter and the cable connected to the PC, you need to control. You should have two buttons, one reset, the other magic !!! In 4100 series it's present in 4300 it's should be!

Make login screenshot with the date! What your model ?

Colleagues, I have download access to anyone not prohibited. Maybe some problems with hosting. It happens sometimes. For the work of the hosting I am not responsible. On the other links that I put up to this point no one complained. Please try again later. Or try this https://www.dropbox.com/s/yb3l370uf0glrb5/upgrade_tools_and_users_manual.rar?dl=0 Sorry! Maybe when I get to this time and desire, I move everything to your server, and bolted cool design and etc