iTuneDVR

Maybe & !!! Try again! http://www.iTuneDVR.ru/_ftp/DAHUA/upgrade_tools_and_users_manual.rar

Connection timed out. I checked before and now - it's ok. Try again!

What's your IPC model? If you have a 4xxx series, it can be done with some one trick and IPC itself will restore! Here are the instructions and software. www.iTuneDVR.ru/_ftp/DAHUA/upgrade_tool ... manual.rar

What time and date now on your Dahua DVR? Make Screenshot!

Current date on you Dahua DVR?

Better send back as already said buellwinkle. The seller has no right to make mistakes, and the customer is always right The next time the seller will be much more attentive and will not give out one after another! Or require a discount, which could be much wiser !!!

Login screenshot, and others! You probably do not want to help themselves. I pointed the way as you get telnet password in another thread of discussion.

gasinmars! There your screenshot?

Shokwave199! I'm your source of self distraction... (MetallicA ) Yes. I have all Dahua firmware, but that does not mean that everything is spread out in free access. If it possible, i give a directed link in my resource

I just upgraded the firmware with the config tool and there was no problem, now I am gonna test if the DHCP trouble is fixed. Thank you ver much, again, Sr. I will post later if this fixed the problem so other people with the same issue could find a solution. I'm glad

I am sorry, the firmware version is 2.610.0000.0, date 2012 08 29, web 2.1.7.72. I habe been trying to find the updated version of the firmware, but I have not had any luck and Dahua Support Keeps ignoring my emails. I would really appreciate if someone could help me. The latest! http://www.iTuneDVR.ru/_ftp/DAHUA/NVR/General_NVR3xxx_Eng_P_V2.616.0000.0.R.20140110.bin

Very simple to change the battery, and check contacts. Check voltage and you'll see. hi, i bought a new batteries, and i changed it. But the problem is still the same. The time clyce every 30 seconds. I don't know what can i do. Firmware? anything else? Thanks. As I understand DVR constantly writes to the flash in a certain area. Why is this done - is unclear. Flashing does not affect this region, only something could be wrong field current variables But for this, you can simply reset the data, not reflash it. I observed this effect and eliminate it, and it seems to me to replace the batteries. Try to remove the battery and run the DVR. Look what happens. The same effect??? I now have at hand is not like DVR, so experimenting!

Russification of the web interface does not take long to

Screenshot firmware version?

Set another NTP server in DVR menu.

Busybox has absolutely nothing to do with here. Place a small intreval time updates on NTP and check the battery CR-2032 (charge)

Very simple to change the battery, and check contacts. Check voltage and you'll see.

Change your battery!

I saw almost the same on the DVR Dahua. The problem was with the battery, replaced it and everything was fine. But in my opinion there was another similar case. As soon as you remember then write the details.

Organized access to cameras connected through ports on POE NVR DS-7108SN / P. In the updated, but the original firmware 3.0.7 NVR no such mechanism as a virtual port! For example forwarded flows on external ports on the internal address of the camera 192.168.254.2, connected to the first port POE 10080 -> 80 10554 -> 554 18000 -> 8000 18200 -> 8200 And so on such a scenario for the other cameras on the POE ports The original article in http://itunedvr.ru/forum/phpBB3/viewtopic.php?f=31&t=321&p=589#p589

It's internal format. For Dahua, i already said. For XM (http://www.xiongmaitech.com) another diskplayer!

Monkey! Again you! DHFS from Dahua DVR? WFS 0.4 - what is it? For Dahua there is disk player!

Connect your DVR to internet and on your router set IP DVR to DMZ! I'm lucky

Simple! Connect your DVR to internet and on your router set IP DVR to DMZ!